Samsung VP-D352 manual Setting the Zero Memory VP-D353i/D354i/D355i only

ENGLISH

Basic Recording

Setting the Zero Memory (VP-D353(i)/D354(i)/D355(i) only)

✤	The ZERO MEMORY function works in both Camera and Player modes.			✤
✤	You can mark a point on a tape that you want to return to following playback.
				✤
1.	Set the Power switch to CAMERA or PLAYER.		1
2.	Set the Mode switch to TAPE.
3.	Press the ZERO MEMORY button on the remote control
	before the recording or during playback at the point where you
	wish to return.
	■ The time code is changed to a tape counter that is set to
	ZERO MEMORY with the	0:00:00 (ZERO MEMORY
	indicator).
	■ If you want to cancel the ZERO MEMORY function, press
	the ZERO MEMORY button again.
4.	Finding the zero position.
	■ When you have finished playback, fast forward or rewind
	the tape in stop mode.			œ
	The tape stops automatically when it reaches the zero

position.

■When you have finished recording, set the Power switch to

PLAYER and press the (REW) button.

The tape stops automatically when it reaches the zero position.

5.The tape counter with the (ZERO MEMORY indicator) disappears from the display and the tape counter is changed to the time code.

[ Notes ]		■
■	In the following situations, ZERO MEMORY mode may be canceled
	automatically:
	- At the end of the section marked with the ZERO MEMORY function.
	- When the tape is ejected.	■
	- When you remove the Battery pack or power supply.
■	The ZERO MEMORY may not function correctly where there is a break
	between recordings on the tape.

VP-D353(i)/D354(i)/D355(i)

■

■

■

■

42