ENGLISH
Initial Setting : System Menu Setting
Viewing the Demonstration (Demonstration)
✤ The Demonstration function may only be used in the <Camera> mode without a tape | 1 | |
inserted in the Camcorder. ➥page 19 | ||
|
✤Before you begin: Make sure that there is no tape inserted in the Camcorder. ➥page 32
✤Demonstration automatically shows you the major functions that are included with your Camcorder so that you may use them more easily.
✤The Demonstration operates repeatedly until the Demonstration mode is switched Off.
1. Set the [Power] switch to [CAMERA].
2.Set the [Mode] switch to [TAPE].
3.Press the [MENU] button.
■The menu list will appear.
4.Press the [▲ / ▼] button to select <System>, then press the [OK] button.
5.Press the [▲ / ▼] button to select <Demonstration>, then press the [OK] button.
6.Press the [▲ / ▼] button to select <On>, then press the [OK] button.
7.Press the [MENU] button.
■The Demonstration will begin.
8.To quit the Demonstration, press the [MENU] button.
[ Notes ]
■The Demonstration function is automatically activated when the Camcorder is left idle for more than 10 minutes after switching to the <Camera> mode (if no tape is inserted in the Camcorder).
■If you press other buttons (FADE, C.NITE, EASY.Q) during the Demonstration mode, the demonstration stops temporarily and resumes 10 minutes later if you do not operate any other functions.
4 | Camera Mode |
|
|
| |
| √System |
|
| Clock Set |
|
| Remote | √On |
| Beep Sound | √On |
| Shutter Sound | √On |
| Language | √English |
| Demonstration | √On |
Move OK Select MENU Exit
6 | Camera Mode |
|
| Back |
|
| Clock Set |
|
| Remote |
|
| Beep Sound |
|
| Shutter Sound |
|
| Language | Off |
| Demonstration | On |
Move OK Select MENU Exit
7SAMSUNG Camcorder is...
34x Optical Zoom
28
Demonstration