ENGLISH
Advanced Recording
Connecting to a VCR
✤You can connect your camcorder to a TV which has no Audio and Video input jacks through a VCR.
1. Connect the camcorder and VCR with the Audio/Video cable. | |
■ | The yellow plug : Video |
■ | The white plug : Audio(L) |
VIDEO AUDIO(L)
VCRAUDIO(R)
| ■ The red plug : Audio(R) - STEREO only |
2. | Connect a TV to the VCR. |
3. | Set the power switch on the camcorder to VCR mode. |
4. | Turn on both the TV and VCR. |
| ■ Set the input selector on the VCR to LINE. |
| ■ Select the channel reserved for your VCR on the TV set. |
5. | Play the tape back. |
Playback
✤You can play the recorded tape in VCR mode.
1.Connect a power source and set the power switch to VCR mode.
2.Insert the tape you wish to play back.
3.Using the (FWD) and (REW) buttons, find the first position you wish to play back.
4.Press the (PLAY/STILL) button.
■The images you recorded will appear on the TV after a few seconds.
■If a tape reaches its end while being played back, the tape will rewind automatically.
TV
ANTENNA
A/V OUT
CAMCORDER
REV
S.SHOW
FWD
DELETE
Notes
■It is best to decrease the volume of the
■The playback mode (SP/LP) is selected automatically.
67