ENGLISH
Advanced Recording
●DATE/TIME
✤The DATE/TIME function works in CAM, VCR, M.REC and M.PLAY modes.
✤The date and time are automatically recorded on a special data area of the tape.
1.Press the MENU button.
■The menu list will appear.
2.Turn the MENU DIAL to highlight VIEWER and push the MENU DIAL.
3.Turn the MENU DIAL to highlight DATE/TIME.
4.Push the MENU DIAL to select the
5.Using the MENU DIAL, select the DATE/TIME mode.
✤ You can choose between - the OFF, DATE, TIME and DATE/TIME modes
■OFF only
■DATE only
■TIME only
■DATE & TIME
✤To return to the previous menu, highlight DATE/TIME in the middle of the menu and push MENU DIAL.
CAM MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER 
LCD ADJUST
DATE / TIME 
TV DISPLAY
CAM MODE
VIEWER SET
LCD ADJUST
DATE / TIME
TV DISPLAY
6. To exit, press the MENU button.
Notes
■The DATE/TIME is not affected by the OSD ON/OFF (DISPLAY) button.
■The DATE/TIME will read “- -
-During playback of a blank section of a tape.
-If the tape was recorded before setting the DATE/TIME in the Camera’s memory.
-When the battery becomes weak or dead.
■Before you can use the DATE/TIME function, you must set the Clock.
CAM MODE
VIEWER SET
DATE / TIME
DATE
TIME 
DATE&TIME
52