USING THE intelli-studio PROGRAMME
Using the
you to manage the video/photo files by using the simple USB cable connection between the camcorder and your PC.
1. Set the "USB Connect: Mass Storage" and "PC Software: On."
•You will find the default menu settings are set as the above.
2.Connect the camcorder and the PC with the USB cable.
•A new file saving screen appears with the
•According to your computer type, the corresponding removable disk window appears.
3.Click "Yes," the uploading procedure will start. Click "Yes" to confirm.
•If you do not want to save a new file, select "No."
To disconnect the USB cable
After completing the data transfer, make sure to disconnect the cable in the following way:
1.Click the "Safely Remove Hardware icon" icon on the taskbar.
2.Select "USB Mass Storage Device," and then click "Stop."
3.If the "Stop a Hardware device" window appears, click "OK."
4.Disconnect the USB cable from the camcorder and PC.
*Use the provided USB cable. (Supplied by Samsung)
*Dorft apply excessive force when inserting or extracting the USB cable into/from a USB jack,
*Insert a USB afler checking the direction of ks insertion is correct,
,We recommend using the AC power adaptor as the power supply instead of the battery.
,When the USB cable is connected, turning the camcorder on or off may cause the PC to malfunction
*Ifyou disconnect the USB cable from the PC or the camcorder while transferring, the data transmission will stop and the data may be damaged,
,Ifyou connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable
along with other USB devices, the camcorder may not work properly. If this occurs, remove all USB devices from the PC and reconnect the camcorder,
,According to your computer type, the
case, ()pen the desired
,When an USB cable is connected, according to the application programme (e,g, EmoDio) installed on your computer, the correspendirlg programme may start first of all,