Flow Chart
The following chart shows the general flow of operation, from preparation to actual use of the communication and Internet functions.
Set the Communication Function
➜
Set the mode dial to [SET] (Setup mode) and set the communication function. You will need the information supplied by the provider or system administrator. → P.17 “Chapter 2”
Connect the Communication Equipment
➜
Connect the camera to the communication card.
→P.55 “Chapter 3”
Preparations are now complete.
Follow the procedures below to actually use the communication function. ➜
Send a captured Image
➜
Set the mode dial to 
(Play mode) and upload an image. There are various ways of doing this. Choose the upload method best suited to your purpose. → P.63 “Chapter 4”
When you want to use more various functions ...
Use the Communication and Internet Functions
Set the mode dial to 
(Communication mode) to use the communication and Internet functions. As well as sending images, you can receive images and upload images to a Web page by
using the JOB Navi. function in Play mode ( 
).
16