Yamaha NS-P220 owner manual

Page 11

●Connect the main, center and rear speakers to the speaker output terminals of your amplifier with the provided speaker cords.

*The provided speaker cords have labels marked FRONT L, FRONT R, CENTER, REAR L or REAR R. Connect each speaker cord to the corresponding speaker by following the figure on page 6.

*Connect each speaker making sure not to reverse the polarity (+, –). If the speaker is connected with reversed polarity, the sound will be unnatural and lack bass.

*For the main and rear speakers only, connect one speaker to the left (marked L) terminals of your amplifier, and another speaker to the right (marked R) terminals.

●Basically, connect the subwoofer to the line output (pin jack) terminal(s) of the amplifier. If your amplifier does not have any line output terminal, connect the subwoofer to the speaker output terminals of the amplifier. (Refer to page 9 for details.)

*To connect with a YAMAHA DSP amplifier (or AV receiver), connect the SUBWOOFER (or LOW PASS etc.) terminal on the rear of the DSP amplifier (or AV receiver) to the L/MONO INPUT2 terminal of the subwoofer.

*To connect the subwoofer to the SPLIT SUBWOOFER terminals on the rear of the DSP amplifier, connect them to both the left L and right R INPUT2 terminals of the subwoofer.

Note

When connecting to a monaural line output terminal of the amplifier, connect the L/MONO INPUT2 terminal.

7

Page 10 Page 12
Image 11
Page 10 Page 12
Contents NS-P220 Safety Instructions FCC Information for US customers only We Want You Listening For a Lifetime15m UnpackingFor U.K. and Europe models only For Canadian CustomersComponents of the Package Subwoofer Main R Center Main L TV-set Rear R Rear L Main L CenterSubwoofer Rear L To mount the speakers on the mounting brackets type a Mounting the main and center speakersMounting the rear speakers An example of basic connections ConnectionsPage Subwoofer INPUT1/OUTPUT terminals How to ConnectMain/center/rear speakers If your amplifier has two sets of speaker output terminals Rear panel Controls and their functionsAutomatic power-switching function Adjusting the subwoofer before useAdvanced Yamaha Active Servo Technology for SW-P201 Standby mode unexpectedly Problem Cause What to Do No soundProblem Cause What to Do Power is not supplied even Though the Power switch is setSW-P201 WeightNX-220P, NX-C220 V742370-1
Top Page Image Contents