3:Setting the date and time
Shutter button Touch pad | Power button |
|
The date/time setting screen is displayed the first time you turn on the camera. Once you set the date and time, the settings are maintained by the camera’s internal rechargeable battery. Although the internal battery recharges each time the main battery is attached to the camera, when the main battery runs out, the internal battery will fully discharge in about a month. If this happens, the date and time will be reset to default settings.
1When you press the power button for the first time, the date/time setting screen appears.
2Touch the center of the touch pad to display the year selection screen.
3Set the year using the touch pad. Slide your finger from left to right over the touch pad to increase the year and from right to left to decrease it. When the year you want is displayed, touch the center of the touch pad.
The year increases. The year decreases.
4In the same way, set the month, date, hour and minute using the touch pad.
��������
�����
5After you set the minute and the date/time display starts flashing, touch the center of the touch pad. You can set the time precisely by touching the touch pad when you hear a time signal. The clock starts operating and the camera is ready to take pictures.
�� � �
��� ��
Notes
•If the internal rechargeable battery is exhausted or the date/time display is reset to the default setting, the date setting screen appears when you turn on the camera.
•The date and time can be adjusted (page 42).
•For detailed instructions on using the touch pad, see page 33.
Getting Started
18
19