4.Enter your security code. You can switch the keyboard from alphabetical characters to numbers/symbols and back by tapping the field to the left of the space bar. Tap ENTER. The Security Code screen displays again.
You must enter a security code to monitor your video from a PC or other device.
5.Tap OK on the system reboot prompt. The Network Setup screen displays.
6.Turn your Uniden Guardian monitor off then back on for the security code change to take effect.
Network Information Screen
1.Tap Network Information to display the Network Information screen.
2. Tap the 
arrow to return to the previous screen.
The DID is a unique code specific to your monitor and is required (along with the security code) to gain remote access to your cameras over the internet. The information in the DHCP setting is assigned to your monitor from your home router.
32