Sony SIR-4150 user manual Shutter condition and speed control, White Balance control, Flk

Page 12

Operating Your Camera

SHUTTER (condition and speed control)

Because SIR-4150 uses built-in dc lens, shutter speed is fixed at 1/60 basically.

SETUP

 

1.LENS

DC

2.SHUTTER

- - -

3.WHITE BAL.

ATW

4.BACKLIGHT

OFF

5.AGC

NORMAL

6.SSNR

LOW

- - - -

: Shutter speed is fixed at 1/60(1/50)

FLK

: Please select 'FLK' mode when flickering occurs on the screen, due to

 

an imbalance between illumination and frequency.

 

NTSC Model : 1/100, PAL MODEL : 1/120

WHITE BALANCE control

The screen color can be adjusted by using the WHITE BALANCE function.

1.Please position the arrow to point to 'WHITE BAL' on the SETUP menu by using the UP and DOWN buttons.

2.Please select the mode you wish to operate by pressing the LEFT or RIGHT button.

SETUP

 

1.LENS

DC

2.SHUTTER

---

3.WHITE BAL.

ATW

4.BACKLIGHT

OFF

5.AGC

NORMAL

6.SSNR

LOW

Please select one of the 3 modes below.

ATW(Auto Tracking White Balance) : This mode can be used within the color temperature range 1,800˚K ~ 10,500˚K (Ex. fluorescent light, outdoor, sodium vapor lamp or inside tunnels)

AWC(Auto White Balance Control) : Please press the SETUP button while the camera is directed at a piece of white paper to obtain the optimum state under current illumination. If the environment including the light source is changed, you have to adjust the white balance again.

MANUAL: The manual adjustment mode enables finer adjustment. Please select ATW or AWC first. Please change to manual adjustment mode and press the SETUP button. Please set the appropriate color temperature, and then increase or decrease the red and blue color values while monitoring the color changes on the object.

Note

Under the following conditions the WHITE BALANCE function may not operate properly. In such cases, please select the AWC mode.

1.When the object’s surroundings have a very high color temperature. (Ex. a clear sky and sunset)

2.When the object’s surroundings are dark.

3.If the camera directly faces a fluorescent light or is installed in a place where there are considerable changes in illumination, the WHITE BALANCE function may become unstable.

COLOR IR CAMERA 22 User’s Manual

COLOR IR CAMERA 23 User’s Manual

Image 12
Contents English SIR-4150 Series Contents Features Ultra High SensitivityPrecautions Strong light directlyOverview Hood Hood adaptorFocus lever Zoom leverBottom Back Adjust to Lens ConnectionConnecting to Power Connecting to RS-485 Control TerminalMenu Setup menu Operating Your CameraLens Adjusting to the brightness level Backlight OFFShutter condition and speed control White Balance controlFLK Backlight Backlight Compensation AGC Auto Gain ControlHIGH/MIDDLE/LOW Ssnr Samsung Super Noise reduction Sens UP Low illuminanceSpecial If AGC is OFF, you cant select Auto mode and B/W mode Motion DetectionCOM ADJ CAM IDTroubleshooting Problem SolutionSpecifications SIR-4150N SIR-4150PMemo