Sony user manual SIR-4150 Series

Page 2

Before operating the camera, confirm the camera model and proper input power voltage. In order to that you can understand this manual thoroughly, we'll introduce our model description.

SIR-4150 SERIES

 

• NTSC MODELS

• PAL MODELS

SIR-4150N

SIR-4150P

MODEL DESCRIPTION

 

SIR-4150 X

 

_

 

SIGNAL SYSTEM

SIGNAL SYSTEM

N --> NTSC MODEL P --> PAL MODEL

The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

INFORMATION -This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

WARNING - Changes or modifications not expressly approved by the manufacturer

could void the user’s authority to operate the equipment.

CAUTION : To prevent electric shock and risk of fire hazards:

Do NOT use power sources other than that specified.

Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and

should conform to all local codes.

Image 2
Contents English SIR-4150 Series Contents Features Ultra High SensitivityPrecautions Strong light directlyFocus lever OverviewHood Hood adaptor Zoom leverBottom Back Adjust to Lens ConnectionConnecting to Power Connecting to RS-485 Control TerminalMenu Setup menu Operating Your CameraLens Adjusting to the brightness level Backlight OFFFLK Shutter condition and speed controlWhite Balance control HIGH/MIDDLE/LOW Backlight Backlight CompensationAGC Auto Gain Control Ssnr Samsung Super Noise reduction Sens UP Low illuminanceSpecial If AGC is OFF, you cant select Auto mode and B/W mode Motion DetectionCOM ADJ CAM IDTroubleshooting Problem SolutionSpecifications SIR-4150N SIR-4150PMemo