Sharp VL-A110U Specifications, Service Information For the U.S, AC Adapter UADP-0312TAZZ

Page 66

References

References

Specifications

VIEWCAM

Signal System: NTSC standard

Recording System: 2 rotary heads, helical scanning system Cassette: 8 mm video tape, MP type

Recording/Playback Time: 120 minutes (P6-120) Tape Speed: 14.345 mm/second

Pickup Device: 1⁄4 (6.4 mm, effective size: 4.5 mm) CCD image sensor (with approx. 270,000 pixels including optical black)

Lens: 16 power zoom lens (F1.4, f4.0–64.0 mm), and full-range auto focus

Lens Filter Diameter: 46 mm

Monitor: 3 (7.5 cm) full-color LCD screen (TFT active matrix) Microphone: Electret monaural microphone

Color Temperature Compensation: Auto white balance with white balance lock

Minimum Illumination: 0.8 lux (5 lux measured by EIA standard) (with gain-up, F1.4) Video Output Level: 1.0 Vp-p 75-ohm unbalanced

Audio Output Level: 8 dBs, impedance less than 2.2 kohms Speaker Output: 200 mW

Power Requirement: DC 3.6 V (with battery pack) DC 7.0 V (with AC adapter)

Power Consumption: 5.1 W (during camera recording in full auto mode with zoom motor off and backlight in normal mode)

Operating Temperature: 0C to 40C (32F to 104F) Operating Humidity: 30% to 80%

Storage Temperature: 20C to 60C (4F to 140F)

Dimensions (approx.): 7 7⁄32 (W) 4 9⁄32 (H) 3 7⁄8 (D)

[183 mm (W) 109 mm (H) 99 mm (D)]

Weight (approx.): 1.57 lbs (710 g) (without battery pack, lithium battery, video cassette, and lens cap)

AC Adapter (UADP-0312TAZZ)

Power Requirement: AC 110–240 V, 50/60 Hz DC Output: 7.0 V

Power Consumption: 15 W

Dimensions (approx.): 2 11⁄16 (W) 1 15⁄32 (H) 5 13⁄32 (D) [68 mm (W) 37 mm (H) 137 mm (D)] Weight (approx.): 0.68 lbs (308 g)

Battery Pack (BT-H22)

DC Output: 3.6 V

Dimensions (approx.): 2 1⁄8 (W) 3⁄4 (H) 2 7⁄32 (D) [54 mm (W) 19 mm (H) 56 mm (D)] Weight (approx.): 0.30 lbs (136 g)

Specifications are subject to change without notice.

SERVICE INFORMATION (For the U.S.)

For the location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies or customer assistance, please call 1-800-BE SHARP (1-800-237-4277) or visit SHARP’s website (http://www.sharp-usa.com).

57

Image 66

Contents See page 54 for use of Demo mode VL-A110UThank you for purchasing this Viewcam from Sharp Applies to the supplied AC adapterInformation Iii Should never be blocked by placingPage Do not aim the lens at the sun Avoid shocks and droppingCleaning LCD Monitor ScreenAC Adapter Vii Viii Tripod adapter For 180 recordingContents References Useful FeaturesAdvanced Features Gamma Brightness CompensationOperation Summary When the cassette compartment door is openPart Names Cassette compartment door pRear view Remote sensor pQuick Reference Index Video cassette is defective and should be Removing the Battery Pack Battery PackInserting the Battery Pack Inserting and RemovingCharging the Battery Pack ContinuousTime Powering the Viewcam from an AC Outlet Removing a Cassette Inserting and Removing a CassetteInserting a Cassette Perform above, then take out the cassetteInstalling the Lithium Memory Battery Removing the Lithium BatterySetting the Language Selecting the Language for the On-screen DisplayChanging the Language Camera Mode VCR ModeFrench On-screen Displays Spanish On-screen Displays Press the SET button B Setting the Date and TimeChanging to the 24-hour Time Mode 0 0Attaching and Removing the Lens Cap Using the Hand Strap and the Lens CapAttaching the Shoulder Strap LCD screen sideTo Pause Recording Easy Camera Recording with Full Auto ModeTo Turn the Power Off Maximum Continuous Recording and Actual Recording TimesZooming Tips on Recording PositionsBasic Operations Camera Recording Remaining Battery Power Display Approx. remaining On-screen Recording time IndicatorRemaining Recording Time Display To Stop Playback Volume ControlPlayback Auto Tape RewindWatching the Playback on a This Viewcam does not have an S-video socketPlayback Video Search StillBasic Operations Playback Menu button Useful FeaturesOperations of the On-screen Controls Display buttonPress the or button C or D to select the desired menu item Desired settingPress the SET button B to select Perform steps 4 to 6 abovePress the SET button B to select AUTO, ON, or OFF Recording the Date and TimePress the or button to select Display Press the button to select SelectFade In and Fade Out Selecting Fade ModeUsing Fade Mode Type of Fade ModesTo cancel Fade mode Quick ReviewTo use fade out only Quick Return Edit Search QU I CKTo obtain a brighter picture To cancel Gamma Brightness CompensationGamma Brightness Compensation Press the Gama EFF. button a againTo cancel the gain-up function Gain-up Cat’s EyeRemoving the Lens Hood Wide ScreenMacro Shots To return to normal pictureMore Information on Self Recording Self RecordingNormal Self Recording To pause recording, press the REC Stop button BSelf-recording Message Setting the Viewcam to Full Auto Mode BlueFeatures Program SearchUseful To reset the counter to zero Tape Counter FeatureUsing the Counter To turn off the tape counterUsing the Counter Memory During playback, press the Menu Button until appearsPress the Play button D to view the desired scene Turning On the Remote Control Mode Using the Remote ControlInstalling the Batteries in the Remote Control Operating the Remote ControlDigital Picture Effects To cancel the digital picture effectAdvanced Features Type of Digital Picture EffectsScene Menu Program AE Type of Scene SettingsTo cancel the scene setting Select Scene Menu in aboveSuperimposing a Title Press the or ß button Q to select Changing the Preset TitlesPress the Reset button to display the title input screen Top of the screen and the cursor willAuto Focus To cancel Manual Focus modeAuto/Manual Focus Manual FocusTo cancel White Balance Lock White Balance LockPress the White BAL. button. White BAL. returns to blue To cancel Manual Exposure mode Manual ExposurePerform steps 1 and 2 above, then press the Auto button B Picture/Backlight Adjustments Press the Menu button until Camera mode or VCR mode appearsType of Backlight Modes Turning Off the LCD Monitor Backlight To cancel Gamma PlaybackGamma Playback Press the Gama EFF. button again. Gamma disappearsCutting Unwanted Sequences Setting Edit ModeEditing To stop editingLighting Useful InformationHints for Better Shooting Tips on Good LightingDew Formation Dirty Video HeadsBattery Pack Replacing the Fluorescent LampUsing Your Viewcam Abroad References Video Cassette TapesUse only tapes with the mark with this Demonstration Mode Canceling Demo Mode Watching the Demonstration Before Requesting Service Symptom Possible cause Suggested solutionVCR Battery Pack BT-H22 SpecificationsService Information For the U.S AC Adapter UADP-0312TAZZInserción de la batería Inserción y extracción de laBatería Extracción de la bateríaCarga de la batería Selecció n de idioma para la visualizació n en pantallaGuía de operació n rá pida en españ ol Extracció n de un videocasete Inserció n y extracció n de un videocaseteInserció n de un videocasete Realice el paso 1 de arriba y luego saque el videocasetePulse el botón REC START/STOP para iniciar la grabación Para hacer una pausa en la grabació nPara desconectar la alimentació n BateríaPara detener la reproducció n Control de volumenReproducció n Rebobinado automá tico de la cintaSharp Plaza, Mahwah, New Jersey Valid for warranty service in the U.S. onlyWhere to Obtain Service What to do to Obtain Service Osaka, Japan