Edit Search | Still Recording |
The edit search function lets you search, without switching from Camera mode to Playback mode, for the point on the tape where you wish to start recording next.
Operation button
1 In Recording Standby mode, press and hold down j (reverse edit search) or k (forward edit search) on the Operation button.
2 When you find the point where you want to begin recording, release the button.
Notes:
•The sound is off during search.
•Forward edit search is performed at the same speed as normal playback, and reverse edit search at 6.5 times the normal playback.
•You may experience picture noise during reverse edit search.
•When the camcorder remains in Recording Standby mode for more than 5 minutes and enters stop mode, edit search will not work.
You can record continuous still images of subjects.
1 In Recording Standby mode, press the PHOTO 
button fully.
•A still image of the subject is displayed.
2 Press the Record Start/ Stop button.
• The still image of the subject will be recorded.
•During still recording,
“RECORDED ON TAPE” appears on the screen.
To pause recording
Press the Record Start/Stop button.
To cancel the still image
Press the PHOTO button fully.
Notes:
•Still Recording can also be used during recording by pressing the PHOTO button fully.
•The picture quality in Still Recording function will be slightly lower than normal pictures.
Useful Features
35 
