Advanced Features Camera Recording
Advanced Features
Locking
1 Select “LOCK MODE” in step 4 in “Selecting” on the previous page.
2 Aim the lens at a white object.
•Adjust the distance of the object so that the entire screen is white.
White paper or white cloth
3 Press the centre of the Operation button to set the white balance lock.
•“LOCK MODE” will change to “LOCK” after pressing the centre of the Operation button.
•“LOCK” flashes during the locking procedure, and stops flashing after locking the white balance.
Note:
•If you move the camcorder while “LOCK” is flashing, “LOCK” may not stop flashing. If this occurs, repeat step 3.
4 Press the DISPLAY/MODE SET button to turn off the MANUAL SET screen.
To return to Auto White Balance mode
Press j in step 4 in “Selecting” on the previous page or step 3 in “Locking” to display “AUTO”.
To return to Full Auto mode
Set the camcorder to Full Auto mode (see page 54).
Note:
•White Balance setting cannot be used when a scene setting is selected.
50