Advanced Features Camera Recording
Advanced Features
Tips on Using the Manual Shutter Speed
•Fast shutter speeds can be used with the still recording functions (see page 35) to record higher quality still images of
•If the
Notes:
•Recording with a shutter speed faster than 1/50 sec. tends to darken the picture. Record in bright locations when you use a fast shutter speed.
•Using a fast shutter speed under fluorescent lighting will cause flickering in the picture and possibly periodic colour shifts.
•When selecting 1/25 sec. or 1/12 sec. shutter speed, you may get a shadow image behind a subject that is moving around a lot.
•The Manual Shutter Speed setting cannot be used when a scene setting is selected or the e indicator appears.
•The shutter speed will be set to AUTO when selecting “ON e” in
Tips on Manual
Settings
When the mode or menu screen is off, press and hold down the centre of the Operation button until the screen shown as below appears. You can set focus, white balance, iris, gain and shutter speed manually.
F U L L A U T O E X E C U T E
F O C U S 
A U T O
WH I T E B A L . A U T O
I R I SA U T O
G A I NA U T O
S H U T . S P E E D A U T O
R E T U RN
Setting the Camcorder to Full Auto Mode
You can set all the settings shown in the screen to Full Auto mode in one operation.
1 In Camera mode, press the DISPLAY/ MODE SET button until the mode screen appears.
2 Press l or m on the Operation button to select “MANUAL SET”, then press the centre of the Operation button (see page 48).
F U L L A U T O 
E X E C U T E
WH I T E B A L . L O C K
I R I S | F 4 . 0 |
G A I N | + 3 d B |
S H U T . S P E E D 1 / 5 0 0
R E T U RN
3 Press l or m to select “FULL AUTO”, then press the centre of the Operation button.
F U L L A U T O 
E X E C U T E
WH I T E B A L .
I R I S
G A I N
S H U T . S P E E D
R E T U RN
4 Press l or m to select “EXECUTE”, then press the centre of the Operation button.
F U L L A U T O E X E C U T E
WH I T E B A L . 
A U T O
I R I SA U T O
G A I NA U T O
S H U T . S P E E D A U T O
R E T U RN
5 Press the DISPLAY/MODE SET button to turn off the MANUAL SET screen.
Note:
•You cannot select “FULL AUTO” when no manual settings are currently in use.
54