Rose electronic CTP-8S manual Caretaker Plus Front Panel Display

Page 7

FRONT PANEL DISPLAY

Caretaker Plus Front Panel Display

POWER LED is lit whenever the unit is powered on.

ADVANCE and SELECT switches are used to enter the configuration menu, go into diagnostic modes, or clear the buffer.

MODE LED is lit to indicate the unit is in the configuration or flow control display mode. DATA LED lights as data is sent to the unit.

BUSY LED is lit when the printer is on-line or busy while accepting data

ERROR LED indicates an error has occurred, with LEDs 1-8 indicating which error.

LEDs 1-8indicate data activity on ports 1-8. When an Led is flashing, that port is sending data to the printer. If an Led is steady, that port has data waiting to be sent to the printer.

CARETAKER PLUS INSTALLATION AND OPERATIONS MANUAL

3

 

Image 7
Contents Installation Operations Manual Page Limited Warranty Table of Contents Disclaimer FeaturesIntroduction First Steps Model Number and OptionsCaretaker Plus Front Panel Display Front Panel DisplaySerial Set-Up for PCs Mode LPT1+COM1Serial Set-up For Other Computers or Terminals Caretaker Plus Rear Panel Serial Model Parallel Set-Up Mode LPT1,,PCaretaker Plus Rear Panel Parallel Model Serial Cabling ConfigurationCabling Parallel CablingNone DTR EnabledDisabled ElectronicsTimeout Configuration Menu ItemsProtocol Keep Disable Operator SwitchesForm Feed Initialization StringUnidirectional X-on/X-off Advanced FeaturesExit Help Main MenuReturn To Previous Menu Reverse Channel Data TimeoutAllow Timeout On Busy Ports Filter CharactersConfiguration Commands =DTR/DSR Protocol CommandInitialization String Command Parallel Enable Logic CommandGrounding Initial State OperationsNormal Operation Explanation Printer Initialization Signal Parallel Models OnlyBuffer Characteristics Unit Software Reset FunctionCopy CON COM1CR TimeoutAdding More Memory Initialization StringChanging the Serial Baud Rate Program Checksum Test Power Up Initial DisplayBuffer Memory Sizing and Read/Write Test Static Ram Read/Write Test Front Panel SwitchesData LED, Busy LED, and Error LED Buffer Overflow Error Display Serial Models OnlyFlow Control Display Mode Serial Models Only III. Garbled data received at shared device TroubleshootingTroubleshooting II. Nothing happens when sending dataPorts do not time out Technical Support Maintenance and RepairShort Test DiagnosticsDiagnostic Modes Restore To Factory DefaultNone Print Configuration/Test Pattern FunctionSerial Units Parallel UnitsLong Test Without Loopback Long Test with Loopback Loopback Test ConnectorsSerial Printers AppendicesAppendix a Serial Cabling Serial ComputersPin Signal Name Acronym Description Appendix B Pinout SpecificationsC36F DB25 Pin Signal Name Port Description Appendix C MP1000 Memory Board Once Completed Installing the BoardVerification of Installation Adding Chips to an Empty Board or Adding Additional ChipsAppendix E General Specifications Appendix D Factory DefaultsPage Stancliff Road Phone 281 Houston, Texas

CTP-8S specifications

The Rose Electronic CTP-8S is an advanced KVM (keyboard, video, mouse) switch designed to meet the demands of modern IT environments. This device allows users to control multiple computers from a single console, enhancing both efficiency and productivity. With its robust features and cutting-edge technologies, the CTP-8S stands out in the market of KVM solutions.

One of the key features of the CTP-8S is its ability to support multiple users. This KVM switch can handle up to eight different computer systems, providing seamless switching between them. This capability is particularly beneficial in environments like data centers, studios, and security operations, where rapid access to multiple devices is essential.

The CTP-8S employs advanced video technology, supporting resolutions up to 1920x1200 at 60Hz. This ensures that users can enjoy clear and sharp visuals, an essential aspect for tasks that require precise monitoring and analysis. The switch supports a variety of video interfaces, making it versatile for different setups, including HDMI, DVI, and VGA connections.

Another standout characteristic of the CTP-8S is its USB compatibility. The device allows users to connect standard USB keyboards and mice, ensuring compatibility with a wide range of peripherals. Furthermore, the CTP-8S supports USB 2.0 hubs, enabling users to connect additional devices such as flash drives and printers, enhancing productivity in multi-tasking environments.

The CTP-8S also features a user-friendly interface, with a straightforward switching mechanism that allows for quick and effortless transitions between computers. Users can switch between systems using hotkeys or the provided remote control, making the device exceptionally convenient to operate in dynamic settings.

In terms of reliability, the CTP-8S boasts a durable design built to withstand the rigors of continuous use. Its robust metal housing provides protection against physical damage, while advanced thermal management ensures optimal performance even during extended operation.

Overall, the Rose Electronic CTP-8S is an exceptional KVM switch that combines user-friendly features with advanced technologies to support complex IT needs. Its ability to manage multiple systems simultaneously, high-quality video output, and compatibility with various peripherals make it an ideal choice for businesses and professionals looking to optimize their workflow.