Fujitsu fi-4640S manual Temporary error

Page 21

Temporary error

<Hopper empty>

<Jam>

<ADF cover open>

<Double feed error>

<No print cartridge installed>

<Print position error or paper alarm>

This message is displayed if there is no more paper on the ADF paper chute during a read operation in ADF mode. Fill the ADF paper chute with paper. To enable the read operation, press the stop button.

This message is displayed if a document is jammed in the ADF. See the “Cleaning and Maintenance” manual for removing jammed documents.

This message is displayed if the ADF is not closed completely. Close the ADF completely, and enable the read operation.

This message is displayed when the ADF detects the Double feed error. Check the document and re-scan the document.

This message is displayed when the print cartridge is not installed in the imprinter. Install the print cartridge.

This message is displayed when the print position (t mark) of the imprinter is positioned out of the paper path or the stacker is full of paper. Set the imprinter in place or remove paper from the stacker.

1-9

Image 21

Contents Fi-4640S Image Scanner Fi-4640S Image Scanner Revisions, Disclaimers Page Fujitsu France S.A Fujitsu OfficesPage Preface TroubleshootingConventions Contents Viii Setup Mode Glossary Terms Index Checking the Components Units and Assemblies Operator Panel ComponentsChecking the Components Units and Assemblies UnitsFi-4640S Part Function Assemblies Arrangement Operator Panel LED Button/LED FunctionCounter Function Counter DisplayOperation status Temporary error Alarm Page Installation and Connections Precautions Inspection Repositioning the Shipping Lock Turning the power switch Off Connecting the power cableCable Connections Connecting the interface cables Mounting the Stacker Setting the Scsi ID and the Scsi Terminator Page Operating Instruction Turning the Power On Waking up the Scanner from the Low Power Mode Manual Feed Mode Setting ADF Loading Documents on the ADFPaper size, and then flip out the plate Paper size, and then flip out the plate Page Loading Documents on the Flatbed Scanner parts involved when loading documentsLoading Documents Larger than the Document Bed Reading a Page from a Thick Book ADF Document Specification Document Size Precautions Paper weightDocument Quality Document typeMore than 30 mm Country Unit Conversion ADF Document Feeder CapacityAreas that must not be perforated Areas not to be PerforatedGrounding color area Grounding Color AreasDouble Feed Detection Condition Job separation sheet Job Separation SheetScanner Specifications Specification Remarks Basic Product SpecificationSpecification Installation SpecificationDimensions Page Consumables and Options Consumables List Name Specification Service life guidelineName Remarks Options ListVideo Interface Board Option How to Install the Video Interface BoardPage AT2 Without IPC-4D With IPC-4D Description OptionParameter Description IPC-4D Option Fi-475PR Option Imprinter Activating the Setup Mode Contents of the Setup Mode Setup ModeActivating the Setup Mode Contents of the Setup Mode Description Selectable Default Parameters Setting double feed detection Paper Thickness Setting double feed detection Paper Length Setting IPC pre-set mode Setting the pick start time Reset of the abrasion counterADF Offset Setting Flatbed Offset Setting Setting the time-out limitPage Scsi ID Setting Scsi Terminator SettingOption IPC/Imprinter Status Display Select Interface Low Power Mode SettingDisplay the TPS Board ID Number Select Built-In/IPC-4D Image ProcessingImage Processing Adjust ADF Erasing Edges Adjust FB Erasing Edges Reset of the Ink Remain Counter Page Glossary of Terms Double Letter Size IPC-4D Paper JAM TPS GL-6 Index Scsi ID

Related manuals

Manual 92 pages 57.24 Kb