|
|
|
| (Continued) | |
|
|
|
|
| |
No | Item | Description | Selectable | Default | |
parameters | |||||
|
|
|
| ||
|
|
|
|
| |
13 | Select Interface | Selects the interface when the scanner has | Auto/SCSI/TPS | Auto | |
a board in the Third Party Slot. | |||||
|
|
|
| ||
|
|
|
|
| |
14 | Display TPS Board | Displays the ID number of the board which | |||
ID Number | is installed in the Third Party Slot. | ||||
|
|
| |||
|
|
|
|
| |
|
| When the |
|
| |
15 | IPC mode | is installed in the third party Slot, select this | Scanner/IPC4D | Scanner | |
|
|
|
| ||
|
| circuit built in the scanner. |
|
| |
|
|
|
|
| |
|
|
| Left/Right: | Left/Right: | |
|
| Adjusts the edge areas to be erased from | 0 to 15 mm | 0 mm | |
|
| Top: | Top: | ||
16 | ADF Edge Erasing | the image scanned by the automatic | |||
0 to 15 mm | 0 mm | ||||
|
| document feeder (ADF). | |||
|
| Bottom: | Bottom: | ||
|
|
| |||
|
|
| 0 mm | ||
|
|
|
|
| |
|
|
| Left/Right: | Left/Right: | |
|
|
| 0 to 15 mm | 0 mm | |
17 | FB Edge Erasing | Adjusts the edge areas to be erased from | Top: | Top: | |
the image scanned by the flat bed (FB). | 0 to 15 mm | 0 mm | |||
|
| ||||
|
|
| Bottom: | Bottom: | |
|
|
| 0 to 15 mm | 0 mm | |
|
|
|
|
| |
18 | Ink Remain | Resets the ink remain counterr. | Reset/No | No | |
|
|
|
|
| |
19 | Numbering Print | Enables or disables the numbering counter | On/Off | Off | |
when the | |||||
|
|
|
| ||
|
|
|
|
|
*This offset refers to the difference from the value adjusted by automatic offset adjustment.
**Some restrictions apply to the detection of a double feed.