64
MOTION SEARCH
The Motion Search provides a dynamic display of the levels of motion in recorded video. Adjust the level of motion to only play clips of video at or above that level.
Tip | To enable motion data to be saved for Motion search, ensure that you select the following settings: | |
| On the Motion setup page under Motion Regions, select the Detect Detail Motion Area check box. | |
| On the General setup page under Display, select the Motion Detect on Continuous Recording check box. | |
Note | Motion Search is only available for newly recorded video; it is not compatible with video recorded prior to version 3.6. | |
| Camera Information | Motion Tolerance Level |
Timeline
Performing a Motion Search
1.From the Search screen select a camera. Motion Search can only be performed on one camera at a time.
2.Click Graphic Search and then click Motion Search.
3.Click the calendar icon to select a day.
4.Adjust the motion level line.
5.Adjust the timeline display settings.
6.Click the play button to start playback.
Tip | You can drag the blue line on the Timeline or motion level box to adjust the time. |
AUDIO PLAYBACK
Audio is played back at 48,000Hz.
To play audio with the video:
1.Select a single camera by turning off all cameras but one using the Camera Select buttons. The audio buttons will be displayed.
2.Select a single audio channel to play. When an audio channel is selected, the Time Sync button will be automatically selected.
3.Click Play.