Lantronix XN manual To Ping a Remote Host, To Perform a Traceroute, Ping Settings

	11: Maintenance and Diagnostics Settings
	Table 11-9 Ping Settings
Diagnostics: Ping Settings	Description
Host	Enter the IP address or host name for the PremierWave to ping.
Count	Enter the number of ping packets PremierWave should attempt to send
	to the Host. The default is 5.
Timeout	Enter the time, in seconds, for the PremierWave to wait for a response
	from the host before timing out. The default is 5 seconds.
To Ping a Remote Host
Using Web Manager

To ping a Remote Host, gclick Diagnostics in the menu and select Ping.

Using the CLI

To enter the command level: enable

Using XML

Not applicable.

Traceroute

Here you can trace a packet from the PremierWave XN to an Internet host, showing how many hops the packet requires to reach the host and how long each hop takes. If you visit a web site whose pages appear slowly, you can use traceroute to determine where the longest delays are occurring.

	Table 11-10 Traceroute Settings
Diagnostics:	Description
Traceroute Settings
Host	Enter the IP address or DNS hostname. This address is used to show the path
	between it and the PremierWave when issuing the traceroute command.
Protocol	Specify the traceroute protocol.

To Perform a Traceroute

Using Web Manager

To perform a Traceroute, gclick Diagnostics in the menu and select Traceroute.

Using the CLI

To enter the command level: enable

Using XML

Not applicable.

PremierWave XN User Guide 79