Lantronix XN manual Icmp Settings, To Configure Icmp Network Stack Settings, ARP Settings

		11: Maintenance and Diagnostics Settings
ICMP Settings
	Table 11-5 ICMP Network Stack Settings
Protocol Stack		Description
ICMP Settings
State		The State selection is used to turn on/off processing of ICMP messages.
		This includes both incoming and outgoing messages. Choose Enabled or
		Disabled.

To Configure ICMP Network Stack Settings

Using Web Manager

To configure ICMP protocol settings, gclick Protocol Stack in the menu and select ICMP.

Using the CLI

To enter the command level: enable -> config -> icmp

Using XML

Include in your file: <configgroup name=”icmp”>

ARP Settings

	Table 11-6 ARP Network Stack Settings
Protocol Stack		Description
ARP Settings
IP Address		Enter the IP address to add to the ARP cache.
MAC Address		Enter the MAC address to add to the ARP cache.

To Configure ARP Network Stack Settings

Using Web Manager

To configure ARP protocol settings, gclick Protocol Stack in the menu and select ARP.

Using the CLI

To enter the command level: enable -> config -> arp

Using XML

 Include in your file: <configgroup name=”arp”>

PremierWave XN User Guide 76