Lantronix manual Installation of PremierWave XN, Package Contents, User-Supplied Items

3:Installation of PremierWave XN

This chapter describes how to install the PremierWave XN device server. It contains the following sections:

Package Contents

User-Supplied Items

Hardware Components

Wi-Fi Protected Setup (WPS)

Installing the PremierWave XN

Package Contents

The PremierWave XN package includes the following items:

One PremierWave XN device

One Power Supply 12 VDC with international adapters

Two External Antenna, RPSMA Connector

One RJ-45 Ethernet Straight Cat5 Cable, 1.5 meter

Quick Start Guide

User-Supplied Items

To complete your installation, you need the following items:

RS-232/422/485 serial devices that require network connectivity.

A serial cable, as listed below, for each serial device. One end of the cable must have a female DB9 connector for the serial port.

-A null modem cable to connect the serial port to another DTE device.

-A straight-through modem cable to connect the serial port to a DCE device.

An available connection to your Ethernet network and an Ethernet cable.

A working AC power outlet if the unit will be powered from an AC power adapter.

Hardware Components

Front/Top Panel

Figure 3-1shows the top panel view of the PremierWave XN. Table 3-6, Table 3-7, Table 3-8,Table 3-9and Table 3-10list and explain the behavior of the LEDs on the top panel.

PremierWave XN User Guide 17