Lantronix XN manual Navigating Web Manager, Web Manager Description See

5: Configuration Using Web Manager

In the middle of many pages, you can select or enter new configuration settings. Some pages show status or statistics in this area rather than allow you to enter settings.

At the bottom of most pages, the current configuration is displayed. In some cases, you can reset or clear a setting.

The information or help area shows information or instructions associated with the page.

A Logout link is available at the upper right corner of every page. In Chrome or Safari, it is necessary to close out of the browser to completely logout. If necessary, reopen the browser to log back in.

The footer appears at the very bottom of the page. It contains copyright information and a link to the Lantronix home page.

Navigating Web Manager

The Web Manager provides an intuitive point-and-click interface. A menu bar on the left side of each page provides links you can click to navigate from one page to another. Some pages are read-only, while others let you change configuration settings.

Note: There may be times when you must reboot the PremierWave XN for the new configuration settings to take effect. The chapters that follow indicate when a change requires a reboot. Anytime you reboot the unit, this operation will take some time to complete. Please wait a minimum of 10-20 seconds after rebooting the unit before attempting to make any subsequent connections.

Web Manager Page	Description	See
		Page
Status	Shows product information and network, line, and tunneling settings.	28
Bridge	Allows you to configure a bridge and shows the current operational state of	89
	the bridge.
CLI	Shows Command Line Interface (CLI) statistics and lets you change the	84
	current CLI configuration settings.
Diagnostics	Lets you perform various diagnostic procedures.	78
DNS	Shows the current configuration of the DNS subsystem and the DNS cache.	60
Email	Shows email statistics and lets you clear the email log, configure email	83
	settings, and send an email.
Filesystem	Shows file system statistics and lets you browse the file system to view a file,	73
	create a file or directory, upload files using HTTP, copy a file, move a file, or
	perform TFTP actions.
FTP	Shows statistics and lets you change the current configuration for the File	61
	Transfer Protocol (FTP) server.
Host	Lets you view and change settings for a host on the network.	58
HTTP	Shows HyperText Transfer Protocol (HTTP) statistics and lets you change the	62
	current configuration and authentication settings.
Line	Shows statistics and lets you change the current configuration and Command	46
	mode settings of a serial line.
Network	Shows status and lets you configure the network interface.	32

PremierWave XN User Guide 30