Toshiba CS6910CL specifications Restriction for Use

Page 23

12.Restriction for Use

Should the equipment be used in the following conditions or environments, give consideration to safety measures and inform us of such usage:

1.Use of the equipment in the conditions or environment contrary to those specified, or use outdoors.

2.Use of the equipment in applications expected to cause potential hazard to people or property, which require special safety measures to be adopted.

This product can be used under diverse operating conditions. Determination of applicability of equipment or devices concerned shall be determined after analysis or testing as necessary by the designer of such equipment or devices, or personnel related to the specifications. Such designer or personnel shall assure the performance and safety of the equipment or devices.

This product is not designed or manufactured to be used for control of equipment directly concerned with human life (*1) or equipment relating to maintenance of public services/functions involving factors of safety (*2). Therefore, the product shall not be used for such applications.

(*1): Equipment directly concerned with human life refers to.

·Medical equipment such as life-support systems, equipment for operating theaters.

·Exhaust control equipment for exhaust gases such as toxic fumes or smoke.

·Equipment mandatory to be installed by various laws and regulations such as the Fire Act or Building Standard Law.

·Equipment related to the above.

(*2) :Equipment relating to maintenance of public services/functions involving factors of safety refers to.

·Traffic control systems for air transportation, railways, roads, or marine transportation

·Equipment for nuclear power generation.

·Equipment related to the above.

CCD color camera CS6910CL Specification (Rev.A)

The contents described in this document may be changed without prior notice.

21

D4134419A

Image 23 Contents
CCD Color Camera CS6910CL Specification Contents ’05-06-07 T.Kazama Rev. ItemFirst Edition Date Camera Link I/F FeaturesOverview ComponentsCCD SpecificationsOptions CPT4000CLWEN Entire area Horizontal-vertical both edge enhancement Camera Link port assignment InterfacesCable-side connector HR10A-10P-12S Hirose Pin assignment Video OUT/DC in connectorDip Switch Settings OFF Video output mode settingTrigger Polarity Positive / Negative Save / Load /RESETCamera Link Serial Control Camera responds to the read request, as follows Register Map Registers accessible to the user are as follows 0OFF Expansion This register is not used in this camera Address Function Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 Sxga output timing Timing ChartsVGA TimingOutline Drawing Cases for Indemnity Limited Warranty Restriction for Use D4134419A
Related manuals
Manual 24 pages 18.77 Kb