With the indirect access registers (Data Register: address 0xB5), continuous data write and continuous data read can be performed.
Up to 32 bytes of data can be written or read by continuous write or read.
Continuous write
To perform continuous write, send a command as follows.
In continuous write, data of any length (up to 32 bytes) can be written.
The data length for continuous write has no relation to the setting value in the Data Length Register (address 0xB6).
The camera treats a reception of ETX, as the end of data.
STX(0x02) | “B”(0x42) | “5”(0x35) | Data0(Upper) | Data0(Lower) | Darta1(Upper) | Data1(Lower) |
Data31(Upper) Data31(Lower) ETX(0x03)
Continuous read
In continuous read, the camera responds as follows.
If you request a read operation for the Data Register (address 0xB5), (the setting value of the Data Length Register (address 0xB6) + 1 byte) of data is read continuously.
STX(0x02) | Data0(Upper) | Data0(Lower) | Data1(Upper) | Data1(Lower) |
Data31(Upper) Data31(Lower) ETX(0x03)
Register map in the indirect address space
The register map in the direct address space is as follows.
| Address |
| Function |
| bit7 |
| bit6 |
| bit5 |
| bit4 |
| bit3 |
| bit2 |
| bit1 |
| bit0 |
| Default |
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||
|
|
|
|
|
|
|
|
|
|
| Value |
| ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| 0x8000000000 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| User Gamma 0 |
|
|
|
|
|
|
| User Gamma 0 |
|
|
|
|
|
|
| - |
| |||
| 0x80000003FF |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CCD color camera CS6910CL Specification (Rev.A)
The contents described in this document may be changed without prior notice.
16
D4134419A