Ductless recirculating is intended for applications where an exhaust duct work is not possible to be installed. When converted, the hood functions as a "purifying" hood rather than an exhaust hood. Fumes and exhaust from cooking is drawn and filtered by a set of optional charcoal filters. The air is then purified and
We recommend to ALWAYS exhaust air outside of the home by employing existing or installing new duct work, if possible. The hood is most effective and efficient as an Exhaust unit. Only when the exhaust option is not possible should you recourse to converting the hood into a "purifying"unit.
When converted to be a "purifying" unit, a set of charcoal filters are required on top of its standard Metal Filter set. Order according to its Part number below. The standard Metal Filters are intended to capture residue from cooking and the optional charcoal filters help to purify fumes exhausted from cooking for
Ductless Recirculating
RECIRCULATING KIT (Required)
1. Kit includes charcoal filters and air diverter plate:
Hood Model: | Part No. | Filters in pkg. | |
|
|
|
|
2 |
| ||
3 |
| ||
3 |
| ||
|
|
|
|
2.Remove metal filters on hood. Clip chacoal filters onto difuser panels.
3.
4.Turn on filter change indicator on control panel (refer details pg. 7)
5.Charcoal filters must be replaced after every 120 hours of use (or approximately every 2 to 3 months based on the average of
air diverter plate
6" straight pipe
wall pipe strap
Charcoal Filter Dimensions:
9 in x 6.4 in
228 mm x 162 mm
Ducting
1.Install a 6" straight pipe attached to the air diverter plate to divert air through louvers on duct cover.
Installation -
9