Zephyr ZVE-E30S, ZVE-E36S, ZVE-E42S Cleaning, Surface Maintenance, Replacing Metal Filters

Surface Maintenance:

Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent , or steel wool/scouring pads which will scratch and damage surface.

For heavier soil use liquid degreaser.

After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and buff out the stainless luster and grain. Always scrub lightly, with clean cotton cloth, and with the grain.

Do not use any product containing chlorine bleach. Do not use “orange” cleaners.

- Cleaning

Metal Filters

The Metal Filters fitted by the factory are intended to filter out residue and grease from cooking. They need not be replaced on a regular basis but are required to be kept clean.

Filters should be cleaned after every 30 hours of use. Use the Filter Clean Reminder function on the controls to determine when filters require cleaning.

Remove and clean by hand or in dishwasher. Spray degreasing detergent and leave to soak if heavily soiled.

Dry filters and re-install before using hood.

Replacing Metal Filters

Should filters wear out due to age and prolonged use, replace with following part number:

Hood Model:	Part No.	Filters in pkg.
ZVE-E30S	Z0F-MO42	2
ZVE-E36S	Z0F-MO43	3
ZVE-E42S	Z0F-MO43	3

Also replace any damaged filter that has punctured or broken mesh, bent or broken frame.

Metal Filter Dimensions:

16.12in x 9.12 in 409 mm x 232 mm

Maintenance

13