Zephyr ZVE-E36S Setting the Filter Change Reminder, Filter Replace Indicator, hold 5 secs

Filter Change Reminder (Charcoal, if fitted):

When your hood is installed as a 'Recirculating' (Ductless) unit, it is fitted with a set of Charcoal Filters to

purify exhaust and fumes from cooking, then re-circulate the air within the home.These Charcoal Filters are required to be replaced after every 120 hours of use. The Filter Change Reminder function in the microprocessor needs to be switched on. The microprocessor in the controls when set, will elapse and count usage time and indicate by a

flashing when charcoal filter replacement is needed.

Indicator

Setting the Filter Change Reminder:

When Off, hold for approx. 5 seconds. The display will change from

(exhaust mode) to , (purifying mode/ carbon filters used) this indicates that the elapse timer function is switched on and Charcoal Filters are used.

Filter Replace Indicator:

When the display starts flashing, the Charcoal Filters require replacement.

Re-setting Function:

Once filters are replaced, with hood off,

press and hold , the display will appear; hold for approximately 5 seconds until

on display disappears . The Filter Change Reminder is now re-set and a new 120 hours elapse cycle is initiated.

Set Mode

hold 5 secs.

Change Filters

To Reset

hold 5 secs.

display from <--> to <C>

display <C> flashes

display from <C> to < >

Features & Controls - Charcoal Filters Change

11