Hood & Duct Cover
www.zephyronline.com
1. Measure from range top to hood bottom | C/L | |
(28” min) Level and mark line A. | ||
| ||
2. Plum and mark center line. |
|
Duct Cover Bracket
3.Mark mounting height line B.
4.Mark mounting spread from C/L
|
|
| |
5. | Fasten | B | |
6. | Fasten screws provided onto EZ anchors, do not | ||
| |||
| fasten screws all the way. |
A
7. Hang hood onto screws and hand tighten (fig A).
the
MOUNTING THE DUCT COVER
28" min
C/L
Installation - Mounting
1. Center and attach duct cover mount bracket on wall below ceiling or soffit.
2. Mount telescopic duct covers onto hood and extend inner duct cover and fasten to bracket.
fig. AEZANCHORS |
Tap EZ anchor tip into marked drywall locations, turn with screw- driver until seated flush.
Note:whenever possible, the hood should be secured to wall studs.
Use EZ anchors only on hollow drywall applications (minimum drywall thickness 1/2”). If a stud or wood surface is present, fasten screws directly into stud or plywood. For all other wall types (concrete, brick, tiles, etc), use appropriate anchors for mounting.
8