Toshiba IK-WD12A, Toshiba Network Camera Adjusting the Lens, To adjust the viewing angle

Adjusting the Lens

Based on the live image retrieved from the camera, adjust the camera lens by doing the following:

To adjust the viewing angle

1.Loosen the pan adjustment screw and then turn the lens module left and right. Upon completion, tighten the screw.

2.Loosen the tilt adjustment screws on both side of the camera and then turn the lens module up and down. Upon completion, tighten the screws.

3.Loosen the rotation adjustment screw and then turn the lens to adjust the image orientation. Upon completion, tighten screw.

Rotate the screw	Do not over tighten the tilt adjustment screws. Doing so will
Turn the lens	damage the tilt mechanism.

CN EXT	IN MIC	OUT AUDIO 4 3 2 1	1	NC EXT	IN MIC	OUT AUDIO 4	3 2	1
NC .INT		I/O		NC .INT			I/O
				Tighten
		Loosen				2
Pan 350o				Loosen			Tighten

NC	EXT	IN MIC	OUT AUDIO	4	3	2	1
NC	.INT				I/O

Tighten

o	Rotate 350o
Tilt 85

3-axis mechanism design and lens direction

The sophisticated 3-axis mechanism design offers very flexible, easy hardware installation for either ceiling or wall mount.

3

Loosen

Pan 350o

Tilt 85o

Direction	Rotate 350	o	DO NOT over rotate the lens. Doing
			so will damage the camera lens
of object			module

17