Toshiba IK-WB01A manual About Wireless LAN Connection, Turn on the power of the camera

Page 27

About Wireless LAN Connection

There are two methods to establish the wireless LAN connection.

1.Cofiguring the wireless network environment for the camera's wireless LAN settings.

2.Cofiguring the camera's wireless LAN settings for the wireless network environment.

The default settings of the network camera are as follows:

● Network information

 

Camera name

: nwcam01

IP address

: 192.168.0.30

Subnet mask

: 255.255.255.0

● Wireless LAN settings

 

Connection mode

: Adhoc method

ESS-ID

: ikwb

Communication channel

: Channel 10

WEP

: None

■ Configuring the wireless network environment for camera's wireless LAN settings

Install a wireless LAN board or wireless LAN card into your personal computer.

1) Turn on the power of the camera

NOTE

Ensure that the LAN cable is not inserted. If the LAN cable is inserted before plugging in the camera, the network camera does not start in wireless LAN mode.

2)Set the IP address of the personal computer

Set the IP address which you are not using other than 192.168.0.30 (camera's IP address).

Set the IP address to 192.168.0.50 (and subnet mask to 255.255.255.0) as an example.

For details on the procedure, refer to the user's guide of the personal computer.

3)Change the wireless LAN settings of the personal computer

Set the same settings as "Wireless LAN settings" of the network camera. For details on the procedure, refer to the user's guide of the installed

wireless LAN card/board.

Introduction

Installation/Setup

Operation

Others

27

Image 27
Contents IK-WB11A Product Name Network Camera Model Numbers IK-WB01A, IK-WB11AFCC Notice Declaration of Conformity Information Terms and Trademarks IntroductionAccessories Accessories for IK-WB01AAccessories for IK-WB11A Table of Contents Important Safety Instructions About the SD Memory CardIK-WB11A only Precautions for UseAbout the AC adaptor SpecificationsOverview of the Network Camera Features of the Camera Introduction Installation/Setup Operation Others Requirements for Network Camera Monitoring System Setting Up the Network Camera EnvironmentInstallation/Setup Names of Camera Parts(IK-WB01A) Front Side BottomRear Side Names of Camera Parts IK-WB11A FrontSet the wall attachment to the wall Installing the Camera IK-WB01ASet the camera to the wall attachment Installing the Camera IK-WB11A Install the rear cover to the wallIndoor Installation Outdoor Installation Install the camera to the rear coverConnect the AC adaptor cable and LAN cable to the camera Attach the camera to the rear coverSet the Sun visor Connecting the Power Cord Turning on the Power About the IP Address Connecting the Camera and Personal Computer by NetworkUsing LAN Cable Using Wireless LAN When using adhoc methodWhen using infrastructure Personal computer Broadband router Set the IP address of the personal computer About Wireless LAN ConnectionTurn on the power of the camera Change the wireless LAN settings of the personal computerTry viewing camera images with Camera Finder → Change the network information of the camera Confirm the camera connection Plug in the camera・The sub menus appear Configuring Settings for Wireless LANFrom the list of sub menus, click Wireless LAN ・The settings appear in the right side of the windowEnter the ESS-ID Configure the communication modeConfigure the communication channel Configure the communication speedConfigure the WEP key Using Camera Finder to Search for a Camera Using the Camera Search Application Camera FinderClick the camera you want to login from the list of cameras From the list of sub menus, click General Configuring the Network ManuallySet Dhcp to OFF Enter the IP address, subnet mask, and default gateway・The default setting is on Enter the camera nameClick Save button ・The settings are registered・Admin Menu screen appears Log-in ID and PasswordClick Changing the Password Admin menu, click the toggle + of Administrator FunctionsInstallation/Setup Administrator Login Administrator OperationScreen Part Names and Functions Admin Menu ScreenImage magnification Alarm NotificationMulti View button SD memory card IK-WB11A Controller buttonShot Administrator Controller Camera name Close buttonPreset Alarm button Record Button Scan buttonScreen Part Names and Functions Operation Camera Settings Setting Items.Recording Settings .Privacy Mask Settings IK-WB01A IK-WB11A)Normal Recording Only Possible when SD Memory Card Inserted Network Settings .Network Connection Settings.Wireless LAN Settings IK-WB01A IK-WB11A .Mail Settings IK-WB01A IK-WB11A .FTP Recording Settings .Routing Table Settings IK-WB01A IK-WB11A.ARP Table Settings .DDNS Settings.Access Restriction Settings IK-WB01A IK-WB11A Security SettingsAdministrator Functions Multi-screen Mode Settings.Firmware Update IK-WB01A IK-WB11A .Setting the Time.Forwarding Settings IK-WB01A IK-WB11A .Browse and Delete SettingsLog Management Angle of view SpecificationsMemo Memo Toshiba America Information SYSTEMS. INC Page Limited Warranty

IK-WB01A specifications

The Toshiba IK-WB01A is a sophisticated indoor network camera designed to meet the surveillance and monitoring needs of both residential and commercial environments. This compact camera stands out with its advanced features and technology, making it an ideal choice for users seeking high-quality video and reliable performance.

One of the main features of the Toshiba IK-WB01A is its impressive image quality. The camera is equipped with a high-resolution image sensor that delivers clear and crisp images, even in low-light conditions. With a capability of up to 640x480 pixels, it ensures that users can capture essential details in various lighting scenarios. The camera’s frame rate can reach up to 30 frames per second, providing smooth video playback.

The IK-WB01A utilizes advanced compression technology, including H.264 video encoding. This allows for high-quality video streaming while minimizing bandwidth usage. Users benefit from greater efficiency, as the camera can deliver real-time video without taxing internet resources. Additionally, the camera supports MJPEG for versatility, catering to different user needs and preferences.

Another significant aspect of the Toshiba IK-WB01A is its flexible network connectivity. The camera can be easily integrated into existing network systems, using both wired and wireless connectivity options. This ensures seamless deployment in various locations without the hassle of complicated installations.

The Toshiba IK-WB01A also features built-in motion detection capabilities. Users can set up alerts that will notify them of any detected movement, enhancing security and reducing the chances of missing critical events. This functionality is supported by configurable settings that allow users to tailor sensitivity levels to their specific requirements.

The camera is designed for ease of use, equipped with a user-friendly web interface for remote access and management. This allows users to view live feeds, adjust settings, and manage recordings from anywhere with internet access. Moreover, the Toshiba IK-WB01A supports compatibility with various third-party software and applications, making it a versatile option for security integration.

In summary, the Toshiba IK-WB01A is a feature-rich network camera that combines high-quality video capabilities, efficient compression technology, flexible connectivity options, and advanced motion detection. With its easy-to-use interface and compatibility with various systems, the IK-WB01A serves as an excellent solution for anyone looking to enhance their surveillance infrastructure. Whether for home security or monitoring business environments, the Toshiba IK-WB01A delivers reliable performance and peace of mind.