Toshiba IK-WB01A manual Change the network information of the camera

Page 29

■ Configuring the camera's wireless LAN settings for the wireless network environment

Beforehand, connect the LAN cable (straight cable) to a hub that has the power turned on or connect the LAN cable (crossover cable) to a personal computer that has the power turned on.

1)Plug in the camera

2)Set the IP address of the personal computer (→page 27)

3)Make sure of the reply from the personal computer to the network camera (→ page 27)

4)Change the wireless LAN settings of the camera

a)Start the "Camera Finder" (→ page 34) and click the "Administrator" button.

b)Click "Network Settings" → "Wireless LAN" in the "Admin Menu".

c)Configure the settings to match those of the wireless network environment.

・The communication mode is set to the adhoc method by default. If you are going to view images via an access point or wireless broadband router, be sure to change the communication mode to infrastructure method.

d)Click the "Save" button.

e)Click the "Reboot" button.

NOTE

●To view an image without using "Camera Finder", start the browser and perform the administrator login (→page 42). Then click the "Live" button.

5)Change the network information of the camera

a)Start the "Camera Finder" (→ page 34) and click the "Administrator" button.

b)Click "Network Settings" → "General"

c)Configure the settings to match those of the wireless network environment.

d)Click the "Save" button.

e)Click the "Reboot" button.

NOTE

●To view an image without using "Camera Finder", start the browser and perform the administrator login (→page 42). Then click the "Live" button.

Introduction

Installation/Setup

Operation

Others

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents IK-WB11A FCC Notice Declaration of Conformity Information Product Name Network CameraModel Numbers IK-WB01A, IK-WB11A Terms and Trademarks IntroductionAccessories for IK-WB11A AccessoriesAccessories for IK-WB01A Table of Contents Important Safety Instructions About the SD Memory CardIK-WB11A only Precautions for UseAbout the AC adaptor SpecificationsOverview of the Network Camera Features of the Camera Introduction Installation/Setup Operation Others Requirements for Network Camera Monitoring System Setting Up the Network Camera EnvironmentInstallation/Setup Rear Names of Camera Parts（IK-WB01A） FrontSide Bottom Side Names of Camera Parts IK-WB11A FrontSet the wall attachment to the wall Installing the Camera IK-WB01ASet the camera to the wall attachment Indoor Installation Installing the Camera IK-WB11AInstall the rear cover to the wall Outdoor Installation Install the camera to the rear coverSet the Sun visor Connect the AC adaptor cable and LAN cable to the cameraAttach the camera to the rear cover Connecting the Power Cord Turning on the Power About the IP Address Connecting the Camera and Personal Computer by NetworkUsing LAN Cable When using infrastructure Using Wireless LANWhen using adhoc method Personal computer Broadband router Turn on the power of the camera About Wireless LAN ConnectionChange the wireless LAN settings of the personal computer Set the IP address of the personal computerTry viewing camera images with Camera Finder → Change the network information of the camera Confirm the camera connection Plug in the cameraFrom the list of sub menus, click Wireless LAN Configuring Settings for Wireless LAN・The settings appear in the right side of the window ・The sub menus appearConfigure the communication channel Configure the communication modeConfigure the communication speed Enter the ESS-IDConfigure the WEP key Using Camera Finder to Search for a Camera Using the Camera Search Application Camera FinderClick the camera you want to login from the list of cameras From the list of sub menus, click General Configuring the Network Manually・The default setting is on Enter the IP address, subnet mask, and default gatewayEnter the camera name Set Dhcp to OFFClick Save button ・The settings are registered・Admin Menu screen appears Log-in ID and PasswordClick Changing the Password Admin menu, click the toggle + of Administrator FunctionsInstallation/Setup Administrator Login Administrator OperationScreen Part Names and Functions Admin Menu ScreenMulti View button Alarm NotificationSD memory card IK-WB11A Controller button Image magnificationPreset Alarm button Record Button Administrator Controller Camera name Close buttonScan button ShotScreen Part Names and Functions Operation Camera Settings Setting Items．Recording Settings ．Privacy Mask Settings IK-WB01A IK-WB11A）Normal Recording Only Possible when SD Memory Card Inserted ．Wireless LAN Settings IK-WB01A IK-WB11A Network Settings．Network Connection Settings ．Mail Settings IK-WB01A IK-WB11A ．ARP Table Settings ．Routing Table Settings IK-WB01A IK-WB11A．DDNS Settings ．FTP Recording Settings．Access Restriction Settings IK-WB01A IK-WB11A Security SettingsAdministrator Functions Multi-screen Mode Settings．Firmware Update IK-WB01A IK-WB11A ．Setting the TimeLog Management ．Forwarding Settings IK-WB01A IK-WB11A．Browse and Delete Settings Angle of view SpecificationsMemo Memo Toshiba America Information SYSTEMS. INC Page Limited Warranty

IK-WB01A specifications

The Toshiba IK-WB01A is a sophisticated indoor network camera designed to meet the surveillance and monitoring needs of both residential and commercial environments. This compact camera stands out with its advanced features and technology, making it an ideal choice for users seeking high-quality video and reliable performance.

One of the main features of the Toshiba IK-WB01A is its impressive image quality. The camera is equipped with a high-resolution image sensor that delivers clear and crisp images, even in low-light conditions. With a capability of up to 640x480 pixels, it ensures that users can capture essential details in various lighting scenarios. The camera’s frame rate can reach up to 30 frames per second, providing smooth video playback.

The IK-WB01A utilizes advanced compression technology, including H.264 video encoding. This allows for high-quality video streaming while minimizing bandwidth usage. Users benefit from greater efficiency, as the camera can deliver real-time video without taxing internet resources. Additionally, the camera supports MJPEG for versatility, catering to different user needs and preferences.

Another significant aspect of the Toshiba IK-WB01A is its flexible network connectivity. The camera can be easily integrated into existing network systems, using both wired and wireless connectivity options. This ensures seamless deployment in various locations without the hassle of complicated installations.

The Toshiba IK-WB01A also features built-in motion detection capabilities. Users can set up alerts that will notify them of any detected movement, enhancing security and reducing the chances of missing critical events. This functionality is supported by configurable settings that allow users to tailor sensitivity levels to their specific requirements.

The camera is designed for ease of use, equipped with a user-friendly web interface for remote access and management. This allows users to view live feeds, adjust settings, and manage recordings from anywhere with internet access. Moreover, the Toshiba IK-WB01A supports compatibility with various third-party software and applications, making it a versatile option for security integration.

In summary, the Toshiba IK-WB01A is a feature-rich network camera that combines high-quality video capabilities, efficient compression technology, flexible connectivity options, and advanced motion detection. With its easy-to-use interface and compatibility with various systems, the IK-WB01A serves as an excellent solution for anyone looking to enhance their surveillance infrastructure. Whether for home security or monitoring business environments, the Toshiba IK-WB01A delivers reliable performance and peace of mind.
Top Page Image Contents