Toshiba IK-WB01A manual About the AC adaptor, Specifications

Page 8

Introduction Installation/Setup Operation

Others

About the AC adaptor

Be sure to use only the supplied AC adaptor. Using a different AC adaptor may cause the camera to malfunction, heat up, or catch fire. Before using the AC adaptor, carefully read and observe the Important Safety Instructions (→page 6) and the notes below.

●Do not allow the connectors on the AC adaptor to come into contact with any other metal object as this may result in short circuit.

●To connect the AC adaptor, firmly insert the plug on the end of the cable into the AC adaptor jack. Do not insert the plug into other jacks as this may cause a malfunction.

●When removing the connection cable, disconnect the cable by holding its plug. Do not disconnect the cable by pulling on the cable.

●Do not drop the AC adaptor or subject it to strong impact.

●Do not use the AC adaptor in hot and humid places.

●Do not use the supplied AC adaptor with devices other than this camera.

●Temperature increasing on the surface of the adaptor is normal. Before moving the adaptor to another location, unplug it from the wall outlet, and wait until its temperature decreases.

●Buzzing noises may come from inside. This does not indicate malfunction.

●Using the AC adaptor near a radio, TV, or cellphone may cause interference. Use the adaptor at sufficient distances from these devices.

Specifications

AC adaptor (AC-WB10)

Power supply

:

100 to 240 V AC, 0.5 A, 50/60 Hz

Rated output

:

10 V DC, 1.5 A

Operating temperature :

-20℃to +50℃ (-4˚F to +122˚F)

Storage temperature

:

-20℃to +65℃

External dimensions

:

50 x 32 x 85 mm (W / H / L)

Length of the cord

:

10 m

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents IK-WB11A FCC Notice Declaration of Conformity Information Product Name Network CameraModel Numbers IK-WB01A, IK-WB11A Introduction Terms and TrademarksAccessories for IK-WB11A AccessoriesAccessories for IK-WB01A Table of Contents Important Safety Instructions Precautions for Use About the SD Memory CardIK-WB11A onlySpecifications About the AC adaptorOverview of the Network Camera Features of the Camera Introduction Installation/Setup Operation Others Setting Up the Network Camera Environment Requirements for Network Camera Monitoring SystemInstallation/Setup Rear Names of Camera Parts（IK-WB01A） FrontSide Bottom Names of Camera Parts IK-WB11A Front SideInstalling the Camera IK-WB01A Set the wall attachment to the wallSet the camera to the wall attachment Indoor Installation Installing the Camera IK-WB11AInstall the rear cover to the wall Install the camera to the rear cover Outdoor InstallationSet the Sun visor Connect the AC adaptor cable and LAN cable to the cameraAttach the camera to the rear cover Connecting the Power Cord Turning on the Power Connecting the Camera and Personal Computer by Network About the IP AddressUsing LAN Cable When using infrastructure Using Wireless LANWhen using adhoc method Personal computer Broadband router About Wireless LAN Connection Turn on the power of the cameraChange the wireless LAN settings of the personal computer Set the IP address of the personal computerTry viewing camera images with Camera Finder → Change the network information of the camera Plug in the camera Confirm the camera connectionConfiguring Settings for Wireless LAN From the list of sub menus, click Wireless LAN・The settings appear in the right side of the window ・The sub menus appearConfigure the communication mode Configure the communication channelConfigure the communication speed Enter the ESS-IDConfigure the WEP key Using the Camera Search Application Camera Finder Using Camera Finder to Search for a CameraClick the camera you want to login from the list of cameras Configuring the Network Manually From the list of sub menus, click GeneralEnter the IP address, subnet mask, and default gateway ・The default setting is onEnter the camera name Set Dhcp to OFF・The settings are registered Click Save buttonLog-in ID and Password ・Admin Menu screen appearsAdmin menu, click the toggle + of Administrator Functions Click Changing the PasswordInstallation/Setup Administrator Operation Administrator LoginAdmin Menu Screen Screen Part Names and FunctionsAlarm Notification Multi View buttonSD memory card IK-WB11A Controller button Image magnificationAdministrator Controller Camera name Close button Preset Alarm button Record ButtonScan button ShotScreen Part Names and Functions Operation Setting Items Camera Settings．Privacy Mask Settings IK-WB01A IK-WB11A ．Recording Settings）Normal Recording Only Possible when SD Memory Card Inserted ．Wireless LAN Settings IK-WB01A IK-WB11A Network Settings．Network Connection Settings ．Mail Settings IK-WB01A IK-WB11A ．Routing Table Settings IK-WB01A IK-WB11A ．ARP Table Settings．DDNS Settings ．FTP Recording SettingsSecurity Settings ．Access Restriction Settings IK-WB01A IK-WB11AMulti-screen Mode Settings Administrator Functions．Setting the Time ．Firmware Update IK-WB01A IK-WB11ALog Management ．Forwarding Settings IK-WB01A IK-WB11A．Browse and Delete Settings Specifications Angle of viewMemo Memo Toshiba America Information SYSTEMS. INC Page Limited Warranty

IK-WB01A specifications

The Toshiba IK-WB01A is a sophisticated indoor network camera designed to meet the surveillance and monitoring needs of both residential and commercial environments. This compact camera stands out with its advanced features and technology, making it an ideal choice for users seeking high-quality video and reliable performance.

One of the main features of the Toshiba IK-WB01A is its impressive image quality. The camera is equipped with a high-resolution image sensor that delivers clear and crisp images, even in low-light conditions. With a capability of up to 640x480 pixels, it ensures that users can capture essential details in various lighting scenarios. The camera’s frame rate can reach up to 30 frames per second, providing smooth video playback.

The IK-WB01A utilizes advanced compression technology, including H.264 video encoding. This allows for high-quality video streaming while minimizing bandwidth usage. Users benefit from greater efficiency, as the camera can deliver real-time video without taxing internet resources. Additionally, the camera supports MJPEG for versatility, catering to different user needs and preferences.

Another significant aspect of the Toshiba IK-WB01A is its flexible network connectivity. The camera can be easily integrated into existing network systems, using both wired and wireless connectivity options. This ensures seamless deployment in various locations without the hassle of complicated installations.

The Toshiba IK-WB01A also features built-in motion detection capabilities. Users can set up alerts that will notify them of any detected movement, enhancing security and reducing the chances of missing critical events. This functionality is supported by configurable settings that allow users to tailor sensitivity levels to their specific requirements.

The camera is designed for ease of use, equipped with a user-friendly web interface for remote access and management. This allows users to view live feeds, adjust settings, and manage recordings from anywhere with internet access. Moreover, the Toshiba IK-WB01A supports compatibility with various third-party software and applications, making it a versatile option for security integration.

In summary, the Toshiba IK-WB01A is a feature-rich network camera that combines high-quality video capabilities, efficient compression technology, flexible connectivity options, and advanced motion detection. With its easy-to-use interface and compatibility with various systems, the IK-WB01A serves as an excellent solution for anyone looking to enhance their surveillance infrastructure. Whether for home security or monitoring business environments, the Toshiba IK-WB01A delivers reliable performance and peace of mind.
Top Page Image Contents