Toshiba Features & Description, Components, IK-65WDA has the following functions

Page 4

1.FEATURES & DESCRIPTION :

(1)IK-65WDA has the following functions.

(1)133 Times Dynamic Range

Toshiba developed algorithms that enable industry leading dynamic range

(2)Digital Noise Reduction (“DNR”)

Exclusive 3 Dimensional Digital Noise Reduction boosts S/N ratio to a incredible 53dB

(3)0.001Lux @ 1.2Minimum Illumination in slow shutter mode

User-definable Sensitivity levels ensure best image quality reproduction dependent on available lighting conditions

(4)User-Definable DAY/NIGHT Threshold

Customize the color to black & white conversion level according to your application needs

(5)MENU-DRIVEN Programming

(6)Remote control from a keyboard etc, by RS422.

(7)Up to 1/100,000 sec shutter speed

(8)520 horizontal TV lines in HI-RESO mode

(9)Easy installation into any AC 24V~/DC 12V system

2.CAUTIONS :

(1)In order to protect the camera, avoid placing or using it under direct sunlight, rain or dust.

(2)Avoid touching the CCD sensor with your fingers. If necessary, use a soft cloth moist- ened with alcohol to wipe off any dust.

(3)When the camera is not in use, keep the lens or lens cap attached to protect the CCD sensor.

(4)Avoid aiming the camera at the sun.

(5)Avoid shooting the camera at intense light. Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may appear on the screen. However, this is not a malfunction.

(6)Install the camera away from video noise. If cables are wired near electric lighting wires or a TV set, noise may appear in images. In this event, relocate cables or reinstall equipment.

3.COMPONENTS :

(1) Camera

1

 

(2) Accessories

 

 

(a) Lens Connector

1

(E4-191J-100(M))

(b) Instruction Manual

1

 

(c) Lens Cap

1

 

(d) Lens, coaxial cable and power cord are not supplied with camera.

4

Image 4
Contents IK-65WDA Important Safeguards Field Installation Marking Components Features & DescriptionIK-65WDA has the following functions Part Names & Functions Rear ViewBasic connection for a single system configuration Connections and OperationsLine-Lock Control OperationBack focus adjustment LensLINE-LOCK Phase DIP Switch SettingsIris DIP2 AES/DC WDR DIP3 ON/OFFDN DIP4 MID/S.DNx32 Menu Driven SET-UP RS422 setting menuMain menu Except for DIP3 and DIP4 on Advanced Main menu DIP3 and DIP4 on Setting switches and the functions On Screen Main menu Except for DIP3 and DIP4 onWDR = Wide dynamic range function N = DAY/NIGHT functionBLC = Back light compensation ID. = Camera ID Gain = AGC gain settingID. POS = Camera ID. Position Cancel DefaultDefault settings ExitOn Screen Advanced Main menu DIP3 and DIP4 on ShutterSharpness White BAL White Balance PTN-GEN = Test pattern generator AWB-RNG = AWB control rangeHI-RESO = Hi resolution DNR = Digital noise reductionNEXT, Back X T I T C a N C E L D E Fault U T T E R On Screen RS422 setting menu for Remote Control AddressProtocol BIT-RATERemote Control Rx+ Tx+Install the camera Where no video noise appears Check the ambient temperature and humidityDo not aim the camera at the sun Do not shoot intense lightCase of Problems Condition Check PointsSpecifications INDOOR2, OutdoorExterior View Page Memo