Toshiba IK-65WDA Connections and Operations, Basic connection for a single system configuration

Page 6

5.CONNECTIONS AND OPERATIONS :

Notes on connecting

•Power plugs of connected equipment must be disconnected before installations.

•A 75-ohm coaxial cable (3C-2V or 5C-2V) is required for standard connection.

•For details of wiring and operation of equipment to be connected, refer to their operation manuals.

•Lenses, coaxial cables for video signals and the power cord are not supplied with the camera.

Refer to the operations manuals of connected equipment for detailed wiring and overall operation instructions.

5.1 Basic connection for a single system configuration

Rx

Rx

Keyboard

CAUTION: Never input 24V AC and 12V DC at the same time.

Do not overload power supply

Since this camera uses 24V AC UL Listed Class 2 power supply or 12V DC power supply, it should be connected to a power supply that allows for at least 7w con- sumption.

6

Image 6

Contents IK-65WDA Important Safeguards Field Installation Marking Features & Description ComponentsIK-65WDA has the following functions Part Names & Functions Rear ViewBasic connection for a single system configuration Connections and OperationsLine-Lock Control OperationBack focus adjustment LensIris DIP2 AES/DC LINE-LOCK PhaseDIP Switch Settings WDR DIP3 ON/OFFDN DIP4 MID/S.DNx32 RS422 setting menu Menu Driven SET-UPMain menu Except for DIP3 and DIP4 on Advanced Main menu DIP3 and DIP4 on WDR = Wide dynamic range function Setting switches and the functionsOn Screen Main menu Except for DIP3 and DIP4 on N = DAY/NIGHT functionBLC = Back light compensation Gain = AGC gain setting ID. = Camera IDID. POS = Camera ID. Position Default settings CancelDefault ExitOn Screen Advanced Main menu DIP3 and DIP4 on ShutterSharpness White BAL White Balance PTN-GEN = Test pattern generator AWB-RNG = AWB control rangeHI-RESO = Hi resolution DNR = Digital noise reductionNEXT, Back X T I T C a N C E L D E Fault U T T E R Protocol On Screen RS422 setting menu for Remote ControlAddress BIT-RATERemote Control Rx+ Tx+Do not aim the camera at the sun Install the camera Where no video noise appearsCheck the ambient temperature and humidity Do not shoot intense lightCase of Problems Condition Check PointsSpecifications INDOOR2, OutdoorExterior View Page Memo