Rack Mount Instructions

Elevated Operating Ambient – If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer.

Reduced Air Flow – Installation of the equipment in a rack should be such that the amount of airflow required for safe operation of the equipment is not compromised.

Mechanical Loading – Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading.

Circuit Overloading – Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on over current protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.

Grounding – Grounding of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips).

FCC STATEMENT

INFORMATION TO THE USER: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

USERS OF THE PRODUCT ARE RESPONSIBLE FOR CHECKING AND COMPLYING WITH ALL FEDERAL, STATE, AND LOCAL LAWS AND STATUTES CONCERNING THE MONITORING AND RECORDING OF VIDEO AND AUDIO SIGNALS. HONEYWELL VIDEO SYSTEMS SHALL NOT BE HELD RESPONSIBLE FOR THE USE OF THIS PRODUCT IN VIOLATION OF CURRENT LAWS AND STATUTES.

UL NOTICE

Underwriters Laboratories Inc. has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested for fire, shock and casualty hazards as outlined in UL’s Standard for Safety UL 60950-1. UL Certification does not cover the performance or reliability of the security or signaling aspects if this product. UL MAKES NO REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.

NVS specifications

Toshiba NVS, or Non-Volatile Storage, represents a cutting-edge solution for data storage management, offering a blend of performance, reliability, and efficiency. Designed primarily for enterprise and high-performance computing environments, NVS technology caters to the growing demand for robust storage solutions that can handle significant workloads without compromising speed or integrity.

One of the standout features of Toshiba NVS is its use of 3D NAND flash technology. Unlike traditional planar NAND, which has a limitation in density and performance, 3D NAND stacks memory cells vertically, enabling higher storage capacities in a smaller footprint. This innovation not only increases data density but also improves endurance and longevity, making NVS suitable for a wide range of applications from cloud computing to database solutions.

Toshiba's NVS is distinguished by its high read and write speeds, which are essential for data-intensive operations. The utilization of advanced controller technologies optimizes data processing, reducing latency and enhancing overall system responsiveness. This makes Toshiba NVS an excellent choice for applications requiring real-time data retrieval and processing, such as virtual machines and large-scale data analytics.

Another key characteristic of NVS is its power efficiency. Incorporating low-power consumption design principles, it helps enterprises minimize energy costs while maximizing performance. This can be particularly advantageous in cloud environments, where energy efficiency directly impacts operational costs and sustainability efforts.

Reliability is paramount in any data storage solution, and Toshiba NVS does not disappoint. With features like data protection technology and robust error correction mechanisms, it ensures data integrity, even in high-stress situations. Additionally, the series is designed to withstand various environmental factors, providing a level of durability that is critical for mission-critical applications.

Compatibility is also a strong suit of Toshiba NVS. The technology supports multiple interfaces, including NVMe and SATA, allowing for easy integration into existing infrastructures. This versatility enables businesses to upgrade their systems without the need for significant overhauls or compatibility concerns.

In summary, Toshiba NVS emerges as a formidable player in the realm of non-volatile storage solutions, combining innovative 3D NAND technology with high performance, reliability, and energy efficiency. Its robust feature set and compatibility make it an ideal option for enterprises looking to enhance their data storage capabilities while preparing for future demands. As technology continues to evolve, Toshiba NVS is poised to remain at the forefront of the storage industry.