IMPORTANT Safety iNSTRUCTiONS

RISKOFELECTRICSHOCK

00 NOTOPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO ©UALIFIED

SERVICE PERSONNEL.

Explanation of graphic symbols:

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert you to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

iMPORTANT

Please record the serial number of this system in the space below.

Model:

Serial No.:

The serial number is located on the rear of the unit.

Retain this Owner's Manual in a safe place for future reference.

For Canadian Customers

To prevent electric shock, match wide blade of plug to wide slot and fully insert.

This Class B digital apparatus complies with Canadian ICES-003.

1Read these instructions.

2Keep these instructions.

3Heed all warnings.

4Follow all instructions.

5Do not use this apparatus near water.

6Clean only with dry cloth.

7Do not block any ventilation openings, l[nstall in

accordance with the manufacturer's instructions.

Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

Do not defeat the sat)ty purpose of the polarized or

grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your

outlet, consult an electrician for replacement of the obsolete outlet.

lO Protect the power cord fi'om being walked on or

pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the

manllfacturer.

12Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with tile apparatus. When a cart is use& use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13Unplug this apparatus during lightning storms or when unused for long periods of time.

14Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, tile apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15Be sure to allow spaces of at least 20cm above, behind and both sides of the unit.

16Do not place the following objects on the unit: A vessel with water in it.

If the vessel falls by vibrations and water spills, it may cause damage to the unit, and/or you may get an electric shock.

SW012 specifications

The Yamaha SW012 is an impressive addition to Yamaha's lineup of professional audio equipment, specifically designed for sound reinforcement in a variety of settings. This subwoofer is part of a series that emphasizes power, precision, and portability, making it a fantastic choice for live sound, events, and installations.

One of the standout features of the Yamaha SW012 is its dual 12-inch drivers, which enable it to deliver a powerful low-frequency response that can enhance any audio experience. With a frequency response that extends down to 45 Hz, the SW012 ensures that deep bass notes are reproduced with clarity and impact, making it ideal for music genres that prioritize low-end frequencies, such as electronic dance music or hip-hop.

The SW012 also incorporates advanced technology, including a built-in high-efficiency Class-D amplifier. This not only provides ample power while maintaining a lightweight design but also enhances the overall efficiency of the system. The combination of a lab-tested amplifier with the drivers allows the SW012 to produce high sound pressure levels, making it suitable for larger venues without compromising sound quality.

In terms of connectivity, the Yamaha SW012 is designed for versatility. It features both XLR input and output connections, allowing for easy integration with a wide range of audio sources and other speakers. Additionally, the subwoofer’s onboard crossover control offers flexibility in adjusting the frequency settings, optimizing the blend between the subwoofer and the main speakers for a more cohesive sound.

Another noteworthy characteristic of the SW012 is its robust construction. The enclosure is built from high-quality materials designed to withstand the rigors of touring and live events. The durable construction not only contributes to its longevity but also helps reduce unwanted vibrations that can compromise audio fidelity.

Portability is also a key consideration in the design of the Yamaha SW012. With convenient handles and a relatively compact footprint, the subwoofer can be transported easily, making it an excellent choice for mobile sound applications.

In summary, the Yamaha SW012 is a powerhouse subwoofer that combines advanced technology, robust design, and ease of use. Whether for live performances, DJ setups, or fixed installations, the SW012 provides deep, impactful bass, making it a valuable asset for any audio professional looking to elevate their sound system.