Yamaha SW012 manual FCC Information, For US customers

Page 3

FCC INFORMATION

1.IMPORTANT NOTICE: DO NOT MODIFYTHIS UNIT!

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Medifications not expressly appreved by Yamaha may void your authority, granted by the FCC, to use the product.

2.IMPORTANT: When connecting this product to accesseries and/or another product, use only high quality shielded cables. Cable(s) supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void

your FCC authorizatien to use this product in the USA.

3.NOTE: This product has been tested and found te comply with the requirements listed in FCC Regulations, Part 15 for Class "B" digital devices. Compliance with these requirements prevides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices.

This equipment generates er uses radio frequencies and, if not installed and used in accordance with the instructions in the user's

manual, may cause interference harmful to the operation of other electronic devices.

(for US customers)

Compliance with FCC regulations does not guarantee that interference will net occur in all installations. If this

product is found to be the source of interference, which

can be determined by turning the unit "OFF" and "ON," please try to eliminate the problem using one of the

following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch circuits (circuit breaker or fuse) or install AC line filter(s).

In the case of radio orTV interference, relocate or reorient the antenna. If the antenna lead-in is 300 ohm

ribbon lead, change the lead-in to a coaxial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to

distribute this product. If you cannot locate the appropriate retailer, please contact Yamaha Electronics

Corp., U.S.A.; 6660 Orangethorpe Ave; Buena Park, CA 90620.

The above statements apply ONLY to those products

distributed by Yamaha Corporation of America or its subsidiaries.

For U.K. customers

If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut offand an appropriate 3 pin plug fitted. For details, refer to the I\_llowing instructions.

Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

IMPORTANT:

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE: Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identit_ing the terminals in your plug, proceed as i%llows: The wire which is coloured

BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is

connected to the earth terminal of the three pin plug.

We Want You Listening for a Lifetime

Yamaha and the Electronic Industries Association's Con-

sumer Electronics Group want you to get the most enjoy-

ment out of your equipment by playing it at a safe level

a level that lets the sound come through loud and

clear without annoying blaring or distortion and, most

importantly, without damaging your sensitive hearing.

Since hearing damage fi'om loud sounds is often undetectable until it is too late, Yamaha and the Electronic Industries Association's Consumer

Electronics Group recolnmend that you avoid prolonged exposure to excessive volume levels.

Image 3
Contents Page IMPORTANT Safety iNSTRUCTiONS For US customers FCC InformationPrecautionsReadthis before operating this unit Table of contents Introduction FeaturesBasicconnectionexample ConnectionsUsingthe subwoofer @Power indicatorVoJuNle Cabinet AdvancedYamahaActiveServo TechnologyIIProblem TroubleshootingPower Supply Specifications@YAMAHA

SW012 specifications

The Yamaha SW012 is an impressive addition to Yamaha's lineup of professional audio equipment, specifically designed for sound reinforcement in a variety of settings. This subwoofer is part of a series that emphasizes power, precision, and portability, making it a fantastic choice for live sound, events, and installations.

One of the standout features of the Yamaha SW012 is its dual 12-inch drivers, which enable it to deliver a powerful low-frequency response that can enhance any audio experience. With a frequency response that extends down to 45 Hz, the SW012 ensures that deep bass notes are reproduced with clarity and impact, making it ideal for music genres that prioritize low-end frequencies, such as electronic dance music or hip-hop.

The SW012 also incorporates advanced technology, including a built-in high-efficiency Class-D amplifier. This not only provides ample power while maintaining a lightweight design but also enhances the overall efficiency of the system. The combination of a lab-tested amplifier with the drivers allows the SW012 to produce high sound pressure levels, making it suitable for larger venues without compromising sound quality.

In terms of connectivity, the Yamaha SW012 is designed for versatility. It features both XLR input and output connections, allowing for easy integration with a wide range of audio sources and other speakers. Additionally, the subwoofer’s onboard crossover control offers flexibility in adjusting the frequency settings, optimizing the blend between the subwoofer and the main speakers for a more cohesive sound.

Another noteworthy characteristic of the SW012 is its robust construction. The enclosure is built from high-quality materials designed to withstand the rigors of touring and live events. The durable construction not only contributes to its longevity but also helps reduce unwanted vibrations that can compromise audio fidelity.

Portability is also a key consideration in the design of the Yamaha SW012. With convenient handles and a relatively compact footprint, the subwoofer can be transported easily, making it an excellent choice for mobile sound applications.

In summary, the Yamaha SW012 is a powerhouse subwoofer that combines advanced technology, robust design, and ease of use. Whether for live performances, DJ setups, or fixed installations, the SW012 provides deep, impactful bass, making it a valuable asset for any audio professional looking to elevate their sound system.