Toshiba RD-XS35SU owner manual Cable input, Tuning channel for the cable box

	6 Cable input				STEP 2: Configuring for Cable
					Your DVD Recorder has more than one input jack. To operate properly with your
					cable box, the TV Guide On Screen system needs to know which one your cable
					box is plugged into. You may have to look at the back of your DVD Recorder
					if you are unsure, as an incorrect selection will result in a blue or snowy screen while
					watching TV.
		ENTER
					Please indicate which DVD Recorder input the cable box is
					plugged into.
					TUNER
					Line 1
		Press	/	to select, then press ENTER.
		If you select “TUNER”, you will go to step 7.
		If you select “Line 1”, you will go to step 8.
	7	Tuning channel for the cable box
					STEP 2: Configuring for Cable
					To operate properly with your cable box, the TV Guide On Screen system needs to
					know the channel your DVD Recorder is on when using the cable box. The most
					commonly used output channel is 03. Please consult your cable box provider if you are
					unsure, as an incorrect selection will result in a blue or snowy screen while
		ENTER			watching TV.
					What is your DVD Recorder tuned to when using the cable box?
					Ch 2
					Ch 3
					Ch 4
		Press	/	to select, then press ENTER.
		Read the instructions and observe the
		diagram. Confirm that the G-LINK™ cable and
	8 its wand is properly installed. (					page 25)
		If OK, press ENTER.
		ENTER
						(Continued)
RD-XS35SU/SC_Inst_E_p29-43	35				06.2.13, 4:33 PM

Introduction

Connections

Basic setup

35