Toshiba RD-XS35SU owner manual Location of the required label, Serial No

Note to cable system installer:

This reminder is provided to call the cable system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

In the spaces provided below, record the Model and Serial No. located on the rear panel of your recorder.

Model No. Serial No.

Retain this information for future reference.

Location of the required label

PRODUCT IS CERTIFIED BY THE

MANUFACTURER TO COMPLY

WITH DHHS RULE 21 CFR

SUBCHAPTER J IN EFFECT AT

DATE OF MANUFACTURE.

1-1,SHIBAURA 1-CHOME,MINATO-KU,

TOKYO 105-8001,JAPAN

Introduction

Connections

Basic setup

3

RD-XS35SU/SC_Inst_E_p02-18 3 06.2.13, 4:33 PM