Toshiba RD-XS35SU owner manual Press Adjust or To set DBS to Not Used or Use, Not used

			Press ADJUST (or					/	) to set “DBS” to “Not
	4 used” or “Use”.
						Not used:
						When a satellite set top box is not connected to the
	A					INPUT3 jacks of the recorder.
	F
	R
	M					Skip to step 8.
	DJ
	E
	/
	A
		U
			S
				T
						Use:
						When a satellite set top box is connected to the INPUT3
						jacks of the recorder.
	5		Press			, then press ADJUST (or				/	) to set
			“IR control” to “On” or “Off”.
						Off: Channels of the satellite set top box are selected
						by its own selector.
		ENTER				Skip to step 8.
						On: The recorder can change channels of the satellite
						set top box.
	F					Be sure to make the G-LINK™ connection
						(	page 25).
	E
	R
	A
	M
	/
	A
	D
		J
		U
			S
				T
			Press			, then press the number buttons to
			enter the 3 digits of a brand code of your
	6 satellite set top box obtained from the list
			(		page 43).
						e.g. If you connect a TOSHIBA satellite set top box:
		ENTER				0	9		0
	1		2		3
	4		5		6
	7		8		9
	0
	7		Press			, then press ADJUST (or				/	) to set
			“ENTER code” to “On” or “Off”.
						Confirm whether the connected satellite set top box
						requires ENTER input after digits in channel selection or
		ENTER				not.
						On: If ENTER input is required.
	F					Off: If ENTER input is not required.
	R
	A
	M
	E
	/
	A
	D
		J
		U
			S
				T							(Continued)
RD-XS35SU/SC_Inst_E_p29-43	41								06.2.13, 4:33 PM

Introduction

Connections

Basic setup

41