Toshiba RD-XS35SU To stop recording, To pause recording to omit an unnecessary portion

Notes

•During recording, you cannot change the recording parameters, such as modes, channels, etc.

•The number of titles cannot exceed 99 for a DVD-RAM/R/RW disc or 396 for the HDD.

•One continuous recording cannot exceed in any case 9 hours. Recording automatically stops at 9 hours.

•Even during normal recording, you can set the programmed recording.

•You cannot start recording immediately before a programmed recording starts.

•For recorded sound, see page 73.

•During monaural sound recording, the same sound is recorded on both the left and right channels.

•When “Audio” is set to “L-PCM”, multi-channel sound is recorded as stereo sound. When playing this recorded sound, you will hear MAIN and SAP sounds simultaneously. Press AUDIO button to select a desired sound.

•When “DVD compatible mode” is set to “Main” or “SAP”, the unit records the same sounds on both the left and right channels when receiving monaural sound. When receiving the multi-channel sound, the selected sound, Main or SAP, is recorded on both the left and right channels.

•Depending on the disc contents, pressing REC button may take a longer time to start recording.

•When a starting time of a programmed recording comes, a recording in execution is stopped and the programmed recording starts. If you do not want to stop the recording, cancel the timer program before it starts.

•Even if you set “Aspect ratio(Video mode)” ( page 154) to “16:9”, images are recorded in 4:3 aspect ratio when using a DVD-R/RW disc with “Rate” set to “1.0” (Mbps) or “1.4” (Mbps).

Introduction RecordingPlayback

Editing

To stop recording

Press STOP.

To pause recording (to omit an unnecessary portion)

During recording, press PAUSE.

To resume recording, press it again.

Note

•Pausing recording automatically creates a new chapter division at that point.

To view a TV program while recording another

1)Start recording on this recorder.

2)On a connected TV, select the TV mode.

3)Using the channel selector of the TV, select a desired channel on the TV.

To reduce noise on recordings (Rec DNR)

Before recording, set “Rec DNR” ( page 154).

Library Function setup

To change a TV channel to be recorded

1)During recording, press PAUSE. Recording pauses.

2)Press CH/Page or the number buttons to change the channel.

3)Press PAUSE to resume recording.

To record and play at the same time

To start recording while playing a disc Stop playback, then select the other disc by pressing HDD or DVD button, and start recording on that disc.

To play a disc while recording on another disc Select the disc that is not being recorded by pressing HDD or DVD button, and start playback on the disc.

Note

•During a dubbing job, the unoccupied drive is available for recording or playback, however, cannot perform a function which records and plays simultaneously.

Others

47