Toshiba RD-XS35SU owner manual Setting up the recorder Press Setup, Setting menu appears

Basic setup

F: Remote control settings (Continued)

Operating the second and third TOSHIBA HDD/DVD video recorders with the remote control of this recorder

Switches the codes to operate the recorder.

If you use the second and third TOSHIBA HDD/DVD video recorders, set the different remote codes for each recorder to avoid confusion in the response of the recorders.

Example: Setting this recorder’s remote control mode to DR 2, after another HDD/DVD recorder has been set to DR 1.

(It is necessary to set the remote control mode on both the recorder and the remote control.)

Setting up the recorder

1 Press SETUP.

The setting menu appears.

SETUP

2 Press / to select “Operational settings”, then press ENTER.

	e.g.
ENTER	Operational settings
	Operation beep	Off
	Completion beep	On
	IR code	DR 1
	Instant skip interval	30	sec.
	Instant replay interval	10	sec.
	Title thumbnail point	35	sec.
	HDD/RAM title play	Title resume
	Still group interval	3	sec.
	Priority contents	Photo

Press	/ to select “IR code”, then press
3 ENTER.
	e.g.
ENTER	Operational settings
	Operation beep	Off	DR 1
	Completion beep	On	DR 2
	IR code	DR 1	DR 3
	Instant skip interval	30 sec.
	Instant replay interval	10 sec.
	Title thumbnail point	35 sec.
	HDD/RAM title play	Title resume
Start	Still group interval	3 sec.
	Priority contents	Photo
Press	/ to select “DR 2” (example), then
4 press ENTER.
	The submenu disappears.
	Press ENTER button and the IR code you selected is
ENTER	activated. Operation may not be possible temporarily until
	you set the corresponding mode of the remote control.
	Proceed to the next setting.

50

RD-XS35SU/SC_Inst_E_p48-56 50 06.2.13, 4:34 PM