Toshiba RD-XS35SU owner manual 101, Press To select Copy, Move or Same Disc. Copy

	Press	/ to select “Copy”, “Move” or “Same
4 Disc”. Copy:
		After the operation is completed, a specified part will
		remain on the disc where it was previously located.
	ENTER	Move:
		A part will move to the opposite disc and will be erased
		from the disc where it was previously located.
		Same Disc:
		A part will be copied to the same disc and the copied
		part will become another title.
		This operation is useful to change a Playlist to Original.
		“Copy” or “Move” is automatically selected in the
		following cases.
		Copy:
		When a specified title (or chapter) is a Playlist.
		When a specified title (or chapter) is locked (			page 56).
		Move:
		When a specified title (or chapter) is copy-protected.
5	Press ENTER.
		Copying starts.
		The job progress is displayed on the screen and the
		front panel display.
	ENTER	When the job finishes, the graph disappears and the
		buzzer sounds.
		You can set the recorder to turn off automatically when
		the job finishes.
		(1) During the operation, press QUICK MENU button.
		(2) Press	/	buttons to select “Auto power off”.
		(3) Press ENTER button.
Notes

•A title or a chapter becomes a title by being copied.

•“Same Disc” job using a DVD-RAM disc will take a longer time.

•“Same Disc” is not available on DVD-R/RW.

•“Move” is not available between the HDD and DVD-R/RW.

•Some parts in DVD-R/RW may be divided if dubbed.

•For a copy-once permitted content, only moving from the HDD to a DVD-RAM disc is available. Executing this will delete the original content in the HDD, and the one moved to a DVD-RAM will not be able to moved or copied.

•“High speed dubbing” is not available between the HDD and DVD-R/RW recorded on other equipment.

•If you record a title directly onto a DVD-R/RW in the DVD-Video mode on this recorder and execute “High speed dubbing” on

the title to the HDD, the recorder may display a message to initialize the HDD. In this case, delete the title or execute “All

HDD titles delete” ( page 156).

Introduction RecordingPlayback

Editing

Library Function setup Others

To cancel copying halfway through the operation

1)While copying, press QUICK MENU. Quick Menu appears.

2)Press / to select “Cancel dubbing”, then press ENTER.

Notes

•Cancellation of a copying operation will result in deletion of a portion of the title or chapter already copied.

•Cancellation of a copying to a DVD-R cannot restore the disc space in the DVD-R.

101