Toshiba RD-XS35SU owner manual Antenna connection, Press To select, then press Enter Confirmation

				STEP 2: Configuring for Cable
				The TV Guide On Screen system needs to locate the correct code for yourcable box
				brand in order to work properly.
	ENTER
				Is your cable box now tuned to channel 09?
				Yes
				No
				Test the code again
		Press	/	to select, then press ENTER.
		If your answer is “Yes”, and:
		• if you selected “TUNER” at step 6,
		you will go to step 13.
		• if you selected “Line 1” at step 6,
		you will go to step 12.
	12	Antenna connection
				STEP 3: Configuring for Antenna
				To supply your DVD Recorder with correct program listings, the TV Guide On Screen
				system needs to know if you have attached an antenna to your DVD Recorder to
				receive over-the-air stations.
	ENTER			Do you have an antenna connected to your DVD Recorder?
				Yes
				No
		Press	/	to select, then press ENTER.
	13	Confirmation
				STEP 4: Confirming Your Settings
				You have entered the following TV Guide On Screen system settings. If any setting
				is marked INCOMPLETE, you will not be able to use the feature until you complete
				that portion of TV Guide On Screen system setup.
				ZIP code - 46001 (USA)
				Cable Box on input “TUNER” Ch. 3
				Cable Box selected: code 036 (Toshiba)
	ENTER
				Are the above settings correct?
				Yes, end setup
				No, repeat setup process
		Press	/	to select, then press ENTER.
				(Continued)
RD-XS35SU/SC_Inst_E_p29-43	37			06.2.13, 4:33 PM

Introduction

Connections

Basic setup

37