Toshiba RD-XS35SU owner manual 161, Recording, TV Guide On Screen, Remote control, Clock

Recording

Cannot be recorded on a DVD-RAM disc.

•The disc is protected from deleting data.

→Set the write-protect tab to the opposite of “PROTECT” ( page 8).

•The disc is protected by a PC or the recorder.

→Disable the protection on the device which protected the disc.

•The disc space is not sufficient.

→Delete unwanted data ( page 55) or prepare a new disc.

•The disc is not initialized.

→Initialize the disc ( page 34).

•The disc may contain errors.

→Complete the physical format on the disc ( page 35).

•The physical format on the disc is not completed.

→Complete the physical format on the disc ( page 35).

Cannot be recorded on the HDD.

•The DVD mode is selected.

→Press HDD button.

•The disc space of the HDD is not sufficient.

→Delete unwanted data ( page 55) or move the contents to DVD-RAM discs ( page 100).

•Some causes such as power failure may set the recorder to reject the operation to protect the HDD.

→Copy necessary contents recorded in the HDD to a DVD-RAM disc, and initialize the HDD.

TV Guide On Screen

TV program list does not appear when TV Guide is pressed.

→Leave the recorder turned off overnight.

→Check the connection and setup TV Guide On Screen® again.

→Listings are not provided for satellite services.

•If you are using a cable box:

→Ensure the G-LINK cable is connected and its IR

transmitter (the G-LINK wand) is placed correctly

in front of the cable box. See page 25,

“INSTALLATION GUIDE”.

→Leave the cable box turned on all of the time and

turn off the recorder when not in use or overnight. →Consult your service provider for more information.

Remote control

The remote control does not work.

•The batteries in the remote control are exhausted.

→Replace all the batteries in the remote control ( page 18, “INSTALLATION GUIDE”).

•The light emitter of the remote control is not pointed at the receptor of this recorder.

→Point the emitter of the remote control at the receptor of this recorder.

•The receptor of this recorder is located too far away from the remote control.

→Operate the remote control within 7 meters (23 ft) from the receptor of this recorder.

•There are obstacles between the remote control and this recorder.

→Remove any obstacles.

•The receptor is disturbed by sunlight or fluorescent light.

→Change the place of this recorder or shield the light.

•The remote mode is not appropriate.

→Adjust the remote mode of the remote control and this recorder ( page 50, “INSTALLATION GUIDE”).

Clock

The clock blinks.

→Set the clock ( page 157).

Introduction RecordingPlayback

Editing

Library Function setup Others

161