Toshiba RD-XS35SU owner manual Canceling selection of a part, Confirming the title information

Canceling selection of a part

1)From EDIT MENU Playlist editing, press / / / to select a part to cancel.

2)Press QUICK MENU. Quick Menu appears.

3)Press / to select “Cancel selected title”, then press ENTER.

The part you have selected is canceled.

Confirming the first and last scenes of a part or a Playlist

You can play the first and last 3 seconds of a scene (Preview). (If a title contains several chapters, the first and last scenes of the chapters are also played.)

Preview of a part:

1)At step 5 on page 93, select a title or a chapter, then press QUICK MENU.

2)Press / to select “Preview”, then press

ENTER.

Preview of all parts:

1)Move the cursor to an any part (in the lower area), then press QUICK MENU button.

2)Press / to select “Preview all playlists”, then press ENTER.

Confirming the title information

1)At step 5 on page 93, select a title or a chapter, then press QUICK MENU.

2)Press / to select “Title information” then press ENTER.

Correcting a Playlist

You can add or delete parts to correct a Playlist.

1)From CONTENT MENU, select a playlist to correct.

2)Press QUICK MENU.

3)Press / to select “Playlist re-editing” and then press ENTER.

“EDIT MENU Playlist editing” appears.

Follow the procedure from steps 5 on page 93, add or delete parts as necessary.

Note

•You cannot edit a title (Playlist) of still pictures, or a title (Playlist) which contains both still and moving pictures.

Using a part in a Playlist also in another Playlist

1)Press EDIT MENU.

“EDIT MENU Main Menu” appears.

2)Press / / / to select “Playlist editing,” then press ENTER.

“EDIT MENU Playlist editing” appears.

3)Press / / / to select “Start” then press

ENTER.

The areas of title name and part selection become blank.

4)Following the procedures outlined on page 93, make a Playlist.

Naming a title (Playlist)

1)From EDIT MENU Playlist editing, move a cursor to the lower side (selected parts) then press QUICK MENU.

2)Press / to select “Edit title name,” then press ENTER.

A keyboard appears.

3)Following the procedures outlined on page 36, enter a title name.

Note

•You can name a title also while viewing its information. From “CONTENT MENU Title List”, select a title and press QUICK MENU button then select “Title Information” by

/ buttons and ENTER button. Further press QUICK MENU button, and select “Edit title name” by / buttons and ENTER button.

Introduction RecordingPlayback

Editing

Library Function setup Others

95