Toshiba IK-TF9C Option, Setting to factory setting status, Changing the shading correction mode

Page 22

(4. 5) Changing the shading correction mode

1Set the "→" to SHAD. by pushing [MENU UP], [MENU DOWN] buttons.

2Set the SHAD. by pushing [DATA UP], [DATA DOWN] buttons.

Note: The alignment value for shading is fixed to "0" when selecting SHAD. OFF. MANU is not dis- played in the menu.

(4. 6) Changing the manual shading correction setting

1Set the "→" to MANU by pushing [MENU UP], [MENU DOWN] buttons.

2Set the MANUAL SHADING by pushing [DATA UP], [DATA DOWN] buttons.

( 5 ) OPTION

(5. 1) Changing serial communication baud rate

1Set the "→" to BAUD RATE by pushing [MENU UP], [MENU DOWN] buttons.

2Select either 9600 or 19200 by pushing [DATA UP], [DATA DOWN] buttons.

Move up down By pushing

MENU UP, DOWN

Set by pushing

DATA UP, DOWN

-- OPTION --

BAUD RATE 9600

• Serial baud rate 9600, 19200

( 6 ) Setting to factory setting status

All the settings can be returned to the factory default status (preset status).

(1)If characters are displayed on the screen, press the [DISP] button to disable the character display.

(2)Push [MENU DOWN] and [DATA DOWN] buttons simultaneously for approx. 1 second.

(3)The preset operation starts. When the preset operation finishes, the character PRESET OK is displayed for approx. 1 second.

22

Image 22

Contents For Customer Use Following information is only for EU-member statesSafety Precautions Avoid setting in humid, smoky, vaporized or dusty places DisclaimerTable of Contents Components Names and Functions Connection Connector Pin AssignmentsStandard Connection Automatic White Balance Manual White Balance OperationWhite Balance Result displayed MeaningShutter speed mode is E.TRG mode Reasons. Such as no white area is included in an object, etcItems Controlled by Using on Screen Display Available selections Preset valueDisp Mode Setting by on Screen DisplayUsing the Menus TRG 1P SNR 1P SR TRG PW SNR TRG PW SRFlicker may be large MenusShutter Electronic shutter TRGPartial scanning setting Changing each setting in Manu modeChanging the shutter speed Mode = SS Changing each setting in SS synchro. scan modeChanging the shutter speed setting Changing the polarity of inputting trigger pulse setting Changing each setting in E.TRG modeChanging each setting in 1P SNR mode Changing 1P SNR exposure time settingMode = E.TRG E.TRG = 1P SR Changing each setting in 1P SR modeChanging 1P SR exposure time setting Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SNRChanging each setting in PW SR mode Mode = E.TRG E.TRG = PW SR Changing the gain in Manu mode Changing each setting in Gain Gain Video gain WHT BAL White balance Changing master pedestal MANU/OFFChanging gamma correction Changing R pedestalChanging the manual shading correction setting Setting to factory setting statusChanging the shading correction mode OptionSynchro. Scan Operation Setting by the frameSetting by 2H Fval Lval DavlE. TRG External trigger 1P SNR 1 Pulse Trigger Sync Non Reset1 Pulse Trigger SYNC-NON Reset Picture Output Timing Fval Lval Dval1P SR 1 Pulse Trigger Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output TimingPW SNR Pulse width trigger SYNC-NON Reset Pulse Width Trigger SYNC-NON Reset Picture Output TimingPW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output TimingPartial Scanning OFF All pixels scanning When Partial Scanning Mode is onPartial Read Partial Scanning onVertical Output Waveform Timing Chart Output Waveform Timing ChartHorizontal Output Waveform Timing Chart Fval LVAL、 DvalSpecifications RGB, 3CCDBefore Making a Service Call External Appearance DiagramSymptom Items to be checked Step-by-step Procedures How to Obtain Warranty Service Limited One 1 Year Warranty of Labor and PartsImaging Systems Division