Toshiba IK-TF9C instruction manual Components

Page 5

This product is 3CCD color camera with digital video output.

1. CAUTIONS ON USE AND INSTALLATION

• Carefully handle the units.

• Handling of the protection cap.

Do not drop, or give a strong shock or vibration to

Keep the protection cap away from children. Chil-

the camera. This may cause problems. Treat the

dren may put them into mouth or swallow them

camera cables carefully to prevent cable prob-

accidentally. The protection cap protects the im-

lems, such as cable breakdown and loosened con-

age sensing plane when the lens is removed from

nections.

the camera, do not throw away.

• Do not shoot intense light.

• When not using the camera for a longtime.

If there is an intense light at a location on the

Stop supplying power.

screen such as a spot light, a blooming and smear-

• When cleaning the camera.

ing may occur. When intense light enters, vertical

Unplug the power source before cleaning. Clean

stripes may appear on the screen. This is not a

with a soft dry cloth only. Do not use benzine, al-

malfunction. Ghosts may occur when there is an

cohol, thinner, household detergents, chemically

intense light near the object. In this case, change

treated cloths, etc. If used, coating and printed

the shooting angle.

letters may be discolored. When cleaning the lens,

• Install the camera in a location free from noise.

use a lens cleaning paper, etc.

If the camera or the cables are located near power

• Avoid using or storing the camera in the fol-

utility lines or a TV, etc. undesirable noise may

lowing places:

appear on the screen. In such a case, try to change

Places filled with highly flammable gas.

the location of the camera or the cable wiring.

 

• Moire

Places near gasoline, benzene, or paint thinner.

Places subject to strong vibration.

When thin stripe patterns are shot, stripe patterns

 

that are not actually there (moire) may appears

Places contacting chemicals (such as pesticides),

as interference stripes. This is not a malfunction.

rubber or vinyl products for a long period of time.

• Operating ambient temperature and humidity.

• Preliminary confirmation of the location where

Do not use the camera in places where tempera-

the camera is installed (with a tripod not used)

 

ture and humidity exceed the specifications. Pic-

Before installing the camera, make sure that the

ture quality will lower and internal parts may be

location can withstand the total weight of the cam-

damaged.

era.

Be particularly careful when using in places ex-

If the camera is installed in places where the

posed to direct sunlight. When shooting in hot

strength of bearing it is insufficient, secure the

places, depending on the conditions of the object

structure by reinforcement etc., to bear the load.

and the camera (for example when the gain is in-

If the reinforcement strength is insufficient, the

creased), noise in the form of vertical strips or

camera may drop, causing personal injury and

white dots may occur. This is not a malfunction.

malfunction.

 

 

 

2. COMPONENTS

 

(1) Camera

1

(2) Accessories

 

(a) Instruction manual

1

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Following information is only for EU-member states For Customer UseSafety Precautions Disclaimer Avoid setting in humid, smoky, vaporized or dusty placesTable of Contents Components Names and Functions Standard Connection Connector Pin AssignmentsConnection White Balance OperationAutomatic White Balance Manual White Balance Result displayed MeaningReasons. Such as no white area is included in an object, etc Shutter speed mode is E.TRG modeAvailable selections Preset value Items Controlled by Using on Screen DisplayUsing the Menus Mode Setting by on Screen DisplayDisp TRG 1P SNR 1P SR TRG PW SNR TRG PW SRShutter Electronic shutter MenusFlicker may be large TRGChanging the shutter speed Changing each setting in Manu modePartial scanning setting Changing the shutter speed setting Changing each setting in SS synchro. scan modeMode = SS Changing each setting in 1P SNR mode Changing each setting in E.TRG modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time settingChanging 1P SR exposure time setting Changing each setting in 1P SR modeMode = E.TRG E.TRG = 1P SR Mode = E.TRG E.TRG = PW SNR Changing each setting in PW SNR modeMode = E.TRG E.TRG = PW SR Changing each setting in PW SR modeGain Video gain Changing each setting in GainChanging the gain in Manu mode WHT BAL White balance Changing gamma correction MANU/OFFChanging master pedestal Changing R pedestalChanging the shading correction mode Setting to factory setting statusChanging the manual shading correction setting OptionSetting by 2H Setting by the frameSynchro. Scan Operation Fval Lval Davl1 Pulse Trigger SYNC-NON Reset Picture Output Timing 1P SNR 1 Pulse Trigger Sync Non ResetE. TRG External trigger Fval Lval Dval1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Trigger Sync ResetPulse Width Trigger SYNC-NON Reset Picture Output Timing PW SNR Pulse width trigger SYNC-NON Reset1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESETPartial Read When Partial Scanning Mode is onPartial Scanning OFF All pixels scanning Partial Scanning onHorizontal Output Waveform Timing Chart Output Waveform Timing ChartVertical Output Waveform Timing Chart Fval LVAL、 DvalRGB, 3CCD SpecificationsSymptom Items to be checked External Appearance DiagramBefore Making a Service Call Imaging Systems Division Limited One 1 Year Warranty of Labor and PartsStep-by-step Procedures How to Obtain Warranty Service

IK-TF9C specifications

The Toshiba IK-TF9C is a state-of-the-art industrial camera designed to meet the demands of high-performance imaging in a variety of applications. With its advanced features and versatile capabilities, the IK-TF9C is perfect for use in fields such as manufacturing, robotics, and scientific research.

One of the standout features of the IK-TF9C is its high-resolution imaging capabilities. The camera boasts a 1.3-megapixel resolution, ensuring that it can capture detailed images with clarity. This high resolution is coupled with a fast frame rate, allowing users to capture dynamic scenes without losing quality. The camera can operate at frame rates of up to 60 frames per second, making it ideal for capturing fast-moving objects or processes.

The IK-TF9C incorporates state-of-the-art CMOS sensor technology, which offers several advantages over traditional CCD sensors. The CMOS sensor provides increased sensitivity, allowing for better performance in low-light conditions. This makes the camera suitable for a wide range of environments, from bright factory floors to dimly lit research facilities. Additionally, CMOS sensors consume less power, contributing to the energy efficiency of the IK-TF9C.

Another key characteristic of the IK-TF9C is its compact and lightweight design. This feature allows for easy integration into existing systems and setups. The camera's small form factor does not compromise its durability; it is built to withstand the rigors of industrial use, including exposure to dust and vibrations.

The IK-TF9C also supports a variety of output formats, including USB and HDMI, facilitating seamless connectivity with other devices and systems. It is compatible with various image processing software, allowing users to utilize advanced image analysis techniques for their specific applications.

Furthermore, the camera supports multiple image capture modes, including still capture and video recording, providing flexibility in how data can be collected and utilized. The temperature operating range of the IK-TF9C enhances its adaptability to different industrial environments, ensuring reliable performance under a variety of conditions.

In summary, the Toshiba IK-TF9C combines high-resolution imaging, advanced CMOS technology, and a robust design to create a versatile industrial camera. Its flexible connectivity options and multiple operating modes make it a suitable solution for various imaging tasks across many sectors, solidifying its position as a leading choice for professionals seeking high-quality imaging solutions.
Top Page Image Contents