Toshiba IK-HD1E instruction manual Awb Ok

Page 13

Display	Meaning
AWB OK	Automatic white balance adjustment finished correctly.
AWB NG	Automatic white balance adjustment cannot be performed because the video level is
LEVEL LOW	too low.
	Adjust the video level by increasing the illumination or opening the lens iris.
AWB NG	Automatic white balance adjustment cannot be performed because the video level is
LEVEL HIGH	too high.
	Adjust the video level by decreasing the illumination or closing the lens iris.
AWB NG	Automatic white balance adjustment cannot be performed because the color
C. TEMP LOW	temperature is too low.
	If the C.TEMP is set to 5600K, set to 3200K.
	If the message appears with the C.TEMP set to 3200K, change the illumination or
	use a color temperature conversion filter.
AWB NG	Automatic white balance adjustment cannot be performed because the color
C. TEMP HIGH	temperature is too high.
	If the C.TEMP is set to 3200K, set to 5600K.
	If the message appears with the C.TEMP set to 5600K, change the illumination or
	use the color temperature conversion filter.
AWB NG	Automatic white balance adjustment cannot be performed for other reasons. Such as
	no white area is included in an object, etc.

MANUAL(Manual white balance)

䊶Set the MODE to MANUAL on the WHT BAL menu. (Refer to the item “7.2 (3) WHT BAL (White Balance)”.)

䊶Shoot a known white object, set the white balance by adjusting the levels of R GAIN and B GAIN on the menu, confirming with a monitor or a vector scope.

(Refer to the item “7.2 (3) (3.3) Changing gain in MANUAL mode”.)

13

Image 13

Contents IK-HD1E Safety Precautions Disclaimer Limitation of Usage Table of ContentsOption Handling the unit ComponentsItems Controlled by the on Screen Display Available selections Preset value Factory settingNames and Functions Standard Connection ConnectionPB/PR HD-SDIConnection on Back Panel Back panel view 3A Connector Pin AssignmentsGND TXD RXD GNDAutomatic Black Balance OperationDisplay Meaning White Balance Features䋨Automatic Tracking 䋨Manual White Balance䋩AWB OK Gain Scene FileAutomatic shading correction operation finished correctly Shading CorrectionUsing the Menus Mode Setting by the on Screen DisplaySHUTTER䋨Electronic shutter䋩 MenusAuto Manual Flicker may be largeChanging the video level in the automatic shutter mode 䋨1䋮1䋩 Changing the setting in Auto modeChanging the automatic shutter response speed Changing the automatic shutter zone area Preset a Preset B Preset C Preset D Preset E䋨1䋮3䋩 Changing the setting in SS Synchro. Scan mode 䋨1䋮2䋩 Changing the setting in Manual modeChanging the shutter speed setting Changing the shutter speed䋨2䋮2䋩 Changing gain in Manual mode Mode Auto MAX GainGain Video gain ModemanualConfirming the contents of the zone area selected by AWB Changing color temperature setting䋨3䋩 WHT BALWhite Balance Changing R PaintMode ATW Paint Mode Manual Gain Temp 䋨3䋮3䋩 Changing gain in Manual modeChanging the red gain Changing the blue gain䋨4䋮1䋩 Changing gamma correction ON/OFF 䋨4䋩 Process䋨4䋮2䋩 Changing gamma correction level 䋨4䋮4䋩 Changing master pedestal 䋨4䋮3䋩 Changing detail outline gain䋨4䋮5䋩 Changing DNR Digital Noise Reduction 䋨5䋩 MATRIXMatrix color correction 䋨5䋮2䋩 Changing Matrix setting䋨5䋮1䋩 Changing Matrix color correction ON/OFF Adjusting horizontal phase 䋨6䋮2䋩 Changing EXT. setting䋨6䋩 Sync 䋨6䋮1䋩 INT screen䋨7䋮2䋩 Changing shading correction mode 䋨7䋮1䋩 Changing Output mode䋨7䋮3䋩 Changing manual shading correction mode 䋨7䋩 Option䋨7䋮6䋩 Changing OSD Output mode 䋨8䋩 Returning to factory settingsOutput RGB RGB SyncUsing the unit with external sync signal 䋨1䋩 External sync signal input conditionsSetting by 1H External SyncSymptom Items to be checked Before Making Service CallCCD SpecificationsSync EXCExternal Appearance Diagram Limited Warranty Toshiba CCD Camera